Jump to content
Why become a member? ×

Rosewood or Maple 'board?


Kobra11
 Share

Recommended Posts

Some might say maple is harder and gives a brighter sound, but I prefer the look of a R/W board.
[url="http://forums.ernieball.com/music-man-guitars/4778-maple-vs-rosewood.html"]http://forums.ernieball.com/music-man-guitars/4778-maple-vs-rosewood.html [/url]

Link to comment
Share on other sites

[quote name='RhysP' timestamp='1354380816' post='1885410']
Lots of people say that a maple board will give a brighter tone than a rosewood one, others will say there's little difference & that the choice is more aesthetic than anything else.
[/quote]
This. In 2 lines Rhys has captured the sum total of human knowledge on this question. There really isn't anything to add to it.

Link to comment
Share on other sites

I've played both and liked both, however I find the feel of a maple board a tad nicer and the tone like others say is slightly brighter, it's not a massive difference though! Aesthetically it depends on what you're going for, but play both and see what you think it's personal choice at the end of the day :)

Link to comment
Share on other sites

[quote name='mart' timestamp='1354382525' post='1885434']
This. In 2 lines Rhys has captured the sum total of human knowledge on this question. There really isn't anything to add to it.
[/quote]

This forum would be a far better place if everyone displayed the intelligence & good taste that you so obviously possess.
:)

Link to comment
Share on other sites

In my own experience , the amount of laquer on the maple board playes a big part in how much difference theur is between maple and rosewood boards . The extra brightness people traditionally associate with maple is actually more to do with the laquer on the board rather than the actual maple itself , so how different the same Fender bass with rosewood and maple boards sound is to a certain extent dictated by what kind of finish is on the board . In the mid to late 1970s Fender basses with maple boards were covered in a thick layer of bulletproof laquer that even coated the frets , and so were much brighter sounding as a result . Nowadays the laquer is much thinner , so there is not as noticable a difference . Choose the one you like the look of the best . They will both sound like a P Bass .

Link to comment
Share on other sites

[quote name='RhysP' timestamp='1354384539' post='1885460']
This forum would be a far better place if everyone displayed the intelligence & good taste that you so obviously possess.
:)
[/quote]

Rhys is not just an intellegent man , but a good- looking one too .

Happy now ?

Edited by Dingus
Link to comment
Share on other sites

I`ve found that of the Precisions I`ve had with maple boards, they tended to have a snappier sound that the rosewood ones. But that`s at home practice volume levels. In all honesty, in the mix, and recorded, I couldn`t tell the difference. So go with the best player, unless you have a specific colour combo fave - for me, its Oly White/Tort/Rosewwood.

Link to comment
Share on other sites

my P has maple and a terrific grindy growl sound due/helped by the more present top end. But - and to be frank the strings/pickup/body wood are all also going to have an effect as much as the neck.
Having said that I would love to know what Rick's Fine's slab P bass build will sound like with the maple laminate fretboard on maple.

Link to comment
Share on other sites

[quote name='mart' timestamp='1354382525' post='1885434']
This. In 2 lines Rhys has captured the sum total of human knowledge on this question. There really isn't anything to add to it.
[/quote]

One thing to add, in the long term, when you come to a refret, rosewood will be cheaper than maple - no relaquer. Other than that the above applies.

Link to comment
Share on other sites

[quote name='bubinga5' timestamp='1354396555' post='1885619']
i think alot of confusion is caused by this argument... maple vs rosewood... on a PASSIVE bass maple is brighter than rosewood, especially with a laquered board... when you intoduce an active system its almost impossible to tell
[/quote]

You'd be pushed to notice it recorded. It's a bit of a myth.

Link to comment
Share on other sites

Personally, I prefer maple boards on my basses both on aesthetic and sound. I've found there is a little bit of a difference sound wise as it gives a bit more of a brighter sound where as rosewood gives more a mid pronounced sound. Tested this by swapping the necks over on a Precision Bass I had a couple of years back and did straight recordings with it.

On a last note, nothing can beat a black bound maple fingerboard with black block inlays and a nice amber tint. Phwoar!

Link to comment
Share on other sites

[quote name='Musicman20' timestamp='1354397318' post='1885632']
You'd be pushed to notice it recorded. It's a bit of a myth.
[/quote]maybe recorded.. but i can tell the difference in playing a laquered maple fret board on a jazz to a rosewood fretboard on a jazz.... pickups were different granted but the maple board was a little brighter/harsher/aggressive.. a myth..? maybe it was the pickups...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...