Jump to content
Why become a member? ×

Omni 10.5 with Eminence Beta-10A


tauzero
 Share

Recommended Posts

One BFM Omni 10.5 speaker. The details of the Omni 10 and 10.5 are now gone from Bill Fitzmaurice's website, but they were a 2x10 and 1x10 horn-loaded design with additional piezos.

The driver is an 8 ohm Eminence Beta-10A. Originally came with a neo driver, but that was sufficiently physically deep that it butted up against the rear of the cab. There are two piezo tweeters in, unswitched. Sockets are two locking jack sockets. I put a single handle on one end - it's a recessed one so it doesn't rattle and I positioned it so it's well balanced.

When I got it, I think it had some sealing issues. I put neoprene tape round the back join to seal that and also on the baffle joint, and I used bolts and inserts to hold the baffle plate to the interior mating surface. There don't seem to be any sealing issues now.

Carpet covered with plastic corner protectors. Carpet is in good condition. There's a grille covering the speaker at the back of the horn.

Weight is 13kg.

Looking for £120 + shipping.



I'll put some better pictures up soon.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...