Mark Bass LMK 2 x channel Bass Amp - £500

[JamesLindsayBass]

Mark Bass LMK 2 x Channel Bass Amplifier - [b]£500[/b]
300w @ 8ohms / 500w @ 4ohms

This is a mighty piece of gear despite the small size and light weight. It's perfect if you need to have two different set ups running at the same time, for example double bass and electric bass. It packs an incredible punch and will fit in your rucksack. (comes with speaker cable and kettle lead). See below for detailed specs!
I've owned it for about 3 years now and recently had it serviced and the mother board replaced so it's working like a dream now. I'm selling because I'm changing up my set up.

This product has now been discontinued by MB, so this is a rare chance to own one!

Located in Glasgow but will post to UK.

Specifications -

INPUTS
INPUT A (master)
impedance 500 Kohm, max. voltage 15 Vpp
INPUT B
impedance 500 Kohm, max. voltage 15 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 10 Vpp

CONTROLS

GAIN CH1
-80 dB to +23 dB range
GAIN CH2
-80 dB to +26 dB range
LINE OUT
level control on front panel
GROUND LIFT
switch on rear panel

EQUALIZATION

CH1
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
10 kHz shelf; level -16 dB
VPF (Variable Pre-shape Filter)
center frequency: 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range cut: 250 Hz - 20 kHz
CH2
LOW
center frequency: 40 Hz; level ±16 dB
LOW-MID
center frequency: 360 Hz, level ±16 dB
HIGH-MID
center frequency: 800 Hz, level ±16 dB
HIGH
10 kHz shelf; level ±16 dB
VPF (Variable Pre-shape Filter)
center frequency: 380 Hz (cut)

OUTPUT

LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"

OTHER

WIDTH
10.87 in. / 27.6 cm
DEPTH
10in. / 25.6 cm
HEIGHT
2.8 in. / 7.1 cm
WEIGHT
6.39 lbs / 2.9 kg
FOOTSWITCH
CH1, CH2, CH1+CH2, mute
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)

Edited January 6, 2013 by JamesLindsayBass

[jjay69]

Ill give this a bump as i have one, it's an excellent amp

[ezbass]

I have an LMll that I can't find a decent reason to replace, twice that amp must be awesome! Have a bump.

[fluffo]

The best micro head they've ever made in my opinion

[JamesLindsayBass]

Still available folks! :-)

[JamesLindsayBass]

bump

[sloth132]

Would you consider trading for a 1000w hartke hydrive 4x10 cab? If your interested please pm me