Badass Posted December 20, 2012 Share Posted December 20, 2012 A more recent Billy video on this....for anyone interested [media]http://www.youtube.com/watch?v=1VjmTQv_KOA[/media] Quote Link to comment Share on other sites More sharing options...
Jon B Posted December 20, 2012 Share Posted December 20, 2012 take the action down until you get buzz,... then up a bit,... done Quote Link to comment Share on other sites More sharing options...
Rayman Posted December 20, 2012 Share Posted December 20, 2012 I don't like a low action. I clank the strings like a horse galloping on tarmac, so my basses are normally 3-4mm at the 12th. I like a bit of daylight between the string and the fretboard. Quote Link to comment Share on other sites More sharing options...
MrTaff Posted December 20, 2012 Share Posted December 20, 2012 I like low action but I'm stuck with the typical Fender ski jump at the heel of the neck, can't get lower than 2mm at the 12th fret without getting the neck sorted. Quote Link to comment Share on other sites More sharing options...
SlapbassSteve Posted December 20, 2012 Share Posted December 20, 2012 Personally I just like to make things as easy as possible for myself, if I'm doing 3x45s the last thing I want is an action miles off the fretboard that requires clamping rather then fretting. I use action as a way of gauging how well made a bass is too, the better a neck has been finished the lower you'll be able to set it before any frets buzz. Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted December 20, 2012 Share Posted December 20, 2012 Mine is 8mm as of today see signature Quote Link to comment Share on other sites More sharing options...
TRBboy Posted December 20, 2012 Share Posted December 20, 2012 [quote name='Jon B' timestamp='1356011884' post='1905674'] take the action down until you get buzz,... then up a bit,... done [/quote] +1 How are people measuring their action by the way? Aren't you supposed to measure it with 1st fret and (something like) 20th fret fretted? Quote Link to comment Share on other sites More sharing options...
Silvia Bluejay Posted December 20, 2012 Share Posted December 20, 2012 (edited) State The Bloody Obvious Corner: your preferences regarding action may change according to the type of strings you use. I learned to play on a student bass with a chunky neck and relatively high action, fitted with roundwounds. Then I learned how to set up a bass and lower the action and did so - my hands are tiny and not very strong, so any effort-saving measure is welcome. Then I moved on to better basses and installed flatwounds on all of them - massive shakeup! When I put TI flats on my 4 I had to tweak the truss rod dramatically and raise the action, because they are so soft. Similar - although slightly less marked - change with my 5s and their D'Addario Chromes. I still tend to prefer lowish action, but low-tension flats are allowing me a little more freedom. Edited December 20, 2012 by bluejay Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted December 20, 2012 Share Posted December 20, 2012 (edited) [quote name='TRBboy' timestamp='1356023636' post='1905946'] +1 How are people measuring their action by the way? Aren't you supposed to measure it with 1st fret and (something like) 20th fret fretted? [/quote] That would be the releif your talking about surely? general rule of thumb appears to be from the top edge of the 12th fret to the underside of the strings I'd say. As for releif I go for press down on the first fret (or capo) then hold down at the 13th fret, I like to be able to just get a tuneful note by pressing down on the string between the two fretted areas, some folk can drive a bus under or often reffered technically as 'the bow and arrow' setup Edited December 20, 2012 by stingrayPete1977 Quote Link to comment Share on other sites More sharing options...
Silvia Bluejay Posted December 20, 2012 Share Posted December 20, 2012 LOL Quote Link to comment Share on other sites More sharing options...
joeystrange Posted December 20, 2012 Share Posted December 20, 2012 My action is pretty high. Not excessively high, but not low either. I'm far too heavy-handed to play with low action. Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted December 20, 2012 Share Posted December 20, 2012 Or face of the fingerboard to the underside of the string for bluejays fretless's'sss-es? Quote Link to comment Share on other sites More sharing options...
Silvia Bluejay Posted December 20, 2012 Share Posted December 20, 2012 Heh... Quote Link to comment Share on other sites More sharing options...
TRBboy Posted December 20, 2012 Share Posted December 20, 2012 [quote name='stingrayPete1977' timestamp='1356024896' post='1905973'] That would be the releif your talking about surely? general rule of thumb appears to be from the top edge of the 12th fret to the underside of the strings I'd say. As for releif I go for press down on the first fret (or capo) then hold down at the 13th fret, I like to be able to just get a tuneful note by pressing down on the string between the two fretted areas, some folk can drive a bus under or often reffered technically as 'the bow and arrow' setup [/quote] Yeah sorry, I meant "....and then measure the height at the 12th fret." At the end of the day, as others have said, it's just whatever works for you innit I'm sure some people would hate my bass and the way it's setup, and some would love it! Quote Link to comment Share on other sites More sharing options...
Silvia Bluejay Posted December 20, 2012 Share Posted December 20, 2012 [quote name='Happy Jack' timestamp='1355994679' post='1905341'] I find ultra-low action basses are unplayable for my style. I had a quick go on MacDaddy's custom jobbie a couple of years ago, set up for tapping and sweeping and stuff. I couldn't get a decent sound out of it! (Sounded very different when he played it, of course.) I'm an ... erm ... enthusiastic player, and I like to dig in. Most people think my action is high. Feels fine to me. And it's me what's playing the thing. [/quote] I just wish I could have a go at playing both your bass and Si's, out of curiosity, seeing that they are so radically different. I've seen and heard both of you play, and clearly your basses' setups suit your respective styles. Ah, well, never mind... Quote Link to comment Share on other sites More sharing options...
iconic Posted December 20, 2012 Share Posted December 20, 2012 (edited) All mine set very low, but I have very soft style. 1st fret gap measured using feeler gauge under string .5 mm...nut set up 8th fret gap .3mm for relief 17th fret under 2mm for string height All this and no fret buzz, but I do like a little clankyness 3 to 4mm string height....that's stratospheric! Edited December 20, 2012 by iconic Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.