Jump to content
Why become a member? ×

Sold-Markbass Little Mark Tube 500


MickyMan
 Share

Recommended Posts

Hi,

Selling my Markbass Little Mark Tube 500, excellent amp, has been looked after, gigged regularly but never pushed hard, comes in original box, good condition, small signs of use.
Functions perfectly, no faults since new.
Genuine sale due to trying Genz Benz out for a while.
Will upload pics soon.

Trying to upload pics but for some reason the Basschat site won't upload selected files.

If you want to see some pictures of the amp email me at [email protected] and I will send files.

£350 ono.

Based in Caterham,Surrey, Junction 6 M25.
Regards Mick
07918 644478.





Spec below copied from Markass website. I believe all specs are accurate but cannot be definite.

INPUTS

INPUT 1
impedance 500 Kohm, max. voltage 15 Vpp
INPUT 2 (Balanced XLR/1/4" combo)
balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
EFFECT RETURN
impedance 33 Kohm, max. voltage 10 Vpp

CONTROLS

GAIN 1
-60 dB to +23 dB range
GAIN 2
-60 dB to +23 dB range
MIX
mixes tube and solid state gain
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT
switch on rear panel
PRE/POST EQ
switch on rear panel
MUTE
push/pull on master knob

EQUALIZATION

LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz-20 kHz (cut)


OUTPUT

LINE OUT
balanced XLR, max. voltage 20 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
SPEAKER OUT
speakon/1/4" combo, 1/4"


OTHER

WEIGHT
6.55 lbs / 2.97 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
(Voltage is factory preset according to region of sale)


NOTES:
Minimum ohm load for all Markbass heads is 4 ohms.

Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country's voltage.
Due to homologation issues, the voltage may not be changed.

Rack ears do not come included with this head.

The Little Mark Tube features a single 6205 miniature tube.

Product specifications are subject to change without notice

Edited by MickyMan
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...