*SOLD* Ashdown ABM410T 600W 8ohm Cabs (X2)

[discreet]

[b]*SOLD* Ashdown ABM 410T 600W 8ohm Cabs (X2)[/b]

It is with reluctance that I put these cabs up for sale. I bought them for a rock covers project that went tits-up, and am now playing in an originals band that doesn't need this kind of grunt - or this blatant show of power! \m/ \m/

They have both been gigged, so display the usual little dents and scuffs, but are structurally extremely sound and are in good working condition. Both tweeters work fine and both cabs are loaded with Ashdown 10" BlueLine drivers which are all 100%. With the right amp these cabs used together sound just as you would expect them to!

ABM410Ts are currently available new and [b]retail[/b] at around [b]£380 EACH[/b]:
[url="http://www.soundsliveshop.com/p/Ashdown_ABM_410T_Bass_Speaker_Cab/ASH-ABM410H"]http://www.soundsliv...Cab/ASH-ABM410H[/url]

[color=#808080][size=4][font=Arial, Helvetica, sans-serif][size=3][b]Ashdown ABM 410T[/b] bass speaker cabs deliver an awesome 600-Watts of power handling, via an 8 Ohm enclosure loaded with 4x 10" drivers. Ashdown ABM 410T bass cabs also come loaded with an HF tweeter to ensure crystal clear highs. ABM410T features a precision tuned plywood cabinet constructed from high-grade birch ply with properly screwed and glued joints, protected by a tough, buffalo leather cloth covering and chromed metal corners.[/size][/font][/size][/color][color=#808080][size=4][font=Arial, Helvetica, sans-serif][size=3]Special Ashdown-designed metal handles are used in favour of inferior flip handles which can rattle after years of use. Ashdown ABM 410T bass cabs also feature BlueLine speakers, which are specially developed to achieve a superb balance of power, transparency and deep, controlled low end, without sacrificing any of the mid-band attack and high-end brightness that are so important in a modern bass sound.[/size][/font][/size][/color]

[color=#808080][size=3]Configuration: 4 x 10" + HF tweeter[/size][/color]
[color=#808080][size=3]Power Handling: 600W RMS, 900W Peak[/size][/color]
[color=#808080][size=3]Impedance: 8 Ohms[/size][/color]
[color=#808080][size=3]Frequency Response: 70Hz - 20kHz[/size][/color]
[color=#808080][size=3]SPL: 103dB 1W @ 1m[/size][/color]
[color=#808080][size=3]Height: 661mm (26")[/size][/color]
[color=#808080][size=3]Width: 610mm (24")[/size][/color]
[color=#808080][size=3]Depth: 420mm (16.5")[/size][/color]
[color=#808080][size=3]Weight: 39kg (86.lbs)[/size][/color]

[color=#000000][size=4]One cab is a Mark I and the other is a Mark II version. Apart from the handle shapes and corner protectors, I can see no difference or hear any difference in sound. The spec is exactly the same for both.[/size][/color]

[color=#000000][size=4]For the moment I only want to sell them as a pair, but may consider splitting them later depending on interest. You could always buy both and flip one on the Bay... [/size][/color]

[color=#000000][size=4]Terms are [b]CASH ON COLLECTION ONLY[/b]. Cabs are located in Lewisham, SE London, near the A205 South Circular not far from the A2 or the M25 South East.[/size][/color]

[color=#000000][size=4]In conclusion, if you want the equivalent of a high-quality, balls-out 8X10 rig that moves extreme amounts of air and will easily handle 1200W RMS - then you're in the right place! Drop me a PM and get yourself a TRUE BARGAIN! [/size][/color]

[color=#000000][size=4][/size][/color]










[color=#000000][size=4]I thank you. [/size][/color]

Edited January 16, 2013 by discreet