stingrayPete1977 Posted January 15, 2013 Share Posted January 15, 2013 (edited) Problem solved no longer for sale Edited January 16, 2013 by stingrayPete1977 Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted January 15, 2013 Author Share Posted January 15, 2013 ON HOLD UNTIL I CAN SEE IF A MODIFICATION CAN BE DONE Link to comment Share on other sites More sharing options...
philparker Posted January 15, 2013 Share Posted January 15, 2013 [quote]I have the D which has had 15mm cut off and has some silk damage[/quote] ...err - I think that may be 15 cm, which might not be good for an after-sale and fitting on to a 3/4 DB?! I'm really sorry to hear about this - and I hope your modification works out well for you, it must be worth that extra effort. Good Luck! Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted January 15, 2013 Author Share Posted January 15, 2013 (edited) Sorry in the heat I have indeed said mm! not cm I may be able to counter sink the tail piece enough tomorrow night to allow them to fit where they will stay for at least ten years! If my plan fails it will not result in any more damage to the strings and I can measure them from the ball to the silks to be sure and list each measurement, remember I have only cut 15cm and the silk is still [i]well[/i] over onto my fingerboard hence the problem. Edited January 15, 2013 by stingrayPete1977 Link to comment Share on other sites More sharing options...
Recommended Posts