Jimryan Posted January 15, 2013 Share Posted January 15, 2013 Evening all, The BC relay bass is coming along nicely. To wire it up, is was going to use my old P bass harness and add an additional volume pot. Just checked out the harness I have, jack connected to a tone pot (with no cap), wired to a tone pot (with cap). Now, wiring definitely isn't my speciality, but I thought only the tone had a capacitor? James Quote Link to comment Share on other sites More sharing options...
kevin_lindsay Posted January 15, 2013 Share Posted January 15, 2013 (edited) Here you go mate http://www.fender.com/en-GB/support/articles/bass-guitar-service-diagrams/ The Frank Bello bass is a P / J layout, or the Hot Rod Precision. Edited January 15, 2013 by kevin_lindsay Quote Link to comment Share on other sites More sharing options...
Jimryan Posted January 15, 2013 Author Share Posted January 15, 2013 [quote name='kevin_lindsay' timestamp='1358279775' post='1936298'] Here you go mate http://www.fender.com/en-GB/support/articles/bass-guitar-service-diagrams/ The Frank Bello bass is a P / J layout, or the Hot Rod Precision. [/quote] Cheers, the hot rod P is pretty much the same as the SD diagram. What's throwing me off the most is the capacitor on the volume pot from the P. Is it ok to leave it on? Should I take it off? Does a tone pot work without one? Saying that though, this thread's outcome is all done to whether or not I can find my soldering iron. If not, I'll take it to a shop, but I'd rather do it myself. I quite enjoy the tinkering/learning side of things. Quote Link to comment Share on other sites More sharing options...
brensabre79 Posted January 16, 2013 Share Posted January 16, 2013 The capacitor on the tone pot is essential, without it its just a volume control! Quote Link to comment Share on other sites More sharing options...
iiipopes Posted January 16, 2013 Share Posted January 16, 2013 Any standard J-bass wiring scheme will work, just substitute the hot lead of the P pickup for the hot lead of the neck J pickup. Quote Link to comment Share on other sites More sharing options...
neepheid Posted January 16, 2013 Share Posted January 16, 2013 As an additional side note: if you get a weak, thin sounding result with both pickups turned up then you need to reverse the connection of one of them (the hot and the earth). It's a 50/50 shot, I got it wrong with my Yamaha BB450. Reversed the bridge pickup, and then it was sorted. Quote Link to comment Share on other sites More sharing options...
Jimryan Posted January 16, 2013 Author Share Posted January 16, 2013 Cheers for all the info guys. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.