Marsy Posted January 30, 2013 Share Posted January 30, 2013 Hey guys, Ive had some major problems with my bassdrive recently, i decided to replace one of the stomp switches as it was showing signs of age but didn't quite pull off the job (ive since learnt im not particularly good at soldering!) I didnt realise that certain wires needed to attach to specific ports on the switch (stupid i know!) As it stands - one or two of the wires going to the switch are running a little short in length (and the wire that ran to the LED first then to the switch snapped, so that wire now runs straight toward the switch at the moment.) So basically the problem is just that one (or maybe two) of the wires running to the on/off 3pdt switch are running short and need extending / replacing. Is this something anyone could help me with? Many thanks in advance! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.