Jump to content
Why become a member? ×

Adding Scratchplate to Squier VMJ


M-Bass-M
 Share

Recommended Posts

I've just acquired a Squier VMJ fretless, which has the usual Jaco sunburst / no scratchplate combo. I've got some long-term plans for the bass, which involves adding a scratchplate.

Now is this as simple as buying a scratchplate, some screws, drilling a few pilot holes and then screwing it on? Will any generic Jazz scratchplate fit?

Cheers

Mark

Link to comment
Share on other sites

Unfortunately on the VMJ the metal control plate (the one with the knobs on) has a more pointed top so the rounded curve on a regular Fender Jazz bass scratchplate will not fit without modifying it. You could replace both the control plate and scratchplate at the same time though, I think a Fender one will fit ok then (in that the screw holes line up) but I'm not 100% sure on that, its been a while since I looked at a VMJ.

Link to comment
Share on other sites

I added a Fender tort scratchplate (among other improvements) to my fretless VM Jazz a while ago and had to do a bit of work to get it to fit properly. Worth the effort as it looks pretty good I think.
Here's a before/after pic of mine:
[url="http://basschat.co.uk/uploads/monthly_07_2011/post-14473-1310984265.jpg"]http://basschat.co.u...-1310984265.jpg[/url]

Edited by johnDeereJack
Link to comment
Share on other sites

[quote name='brensabre79' timestamp='1359988459' post='1963003']
You could replace both the control plate and scratchplate at the same time though, I think a Fender one will fit ok then (in that the screw holes line up) but I'm not 100% sure on that, its been a while since I looked at a VMJ.
[/quote]
I'm considering fitting a new pre-amp with attached control plate, so it seems as though these two modifications will have to be done together. Thanks for the respsonses.

Link to comment
Share on other sites

[quote name='M-Bass-M' timestamp='1359995218' post='1963190']
I'm considering fitting a new pre-amp with attached control plate, so it seems as though these two modifications will have to be done together. Thanks for the respsonses.
[/quote]
No worries. I have an ACG/John East J-Retro pre on my fretless JB that I'm thinking of taking off actually. I don't think they make these any more - its the one that comes ready installed on the control plate. Also a black/white/black scratchplate is coming off at the same time. So if you're interested drop me a PM when you're ready to do the mod.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...