joegarcia Posted February 6, 2013 Share Posted February 6, 2013 (edited) Parting with some more mics as work is a little slow this time of year. First up is two SM58's. One is a slightly older style one with a few knocks to the grille. It has no box, case or clip. £45 plus postage [b]SOLD[/b] The second is a newer one with one slightly rusty knock to the grille. It has a box and case (not pictured) but no clip. £50 plus postage [b]SOLD[/b] I'd take £90 for both SM58's. Lastly is one of my fave mics, the Beyerdynamic Opus 65. This is a really, really nice kick drum mic but is of course also good on bass cabs, brass or whatever. Had really good results on a particularly deep floor tom with this too. It has a clip and case and am fairly sure I have the box/manual somewhere too. [b]SOLD[/b] Beyer guff: [size=2][font=Arial][b][b]The Opus 65 has been designed primarily for close miking of the kick drum, but is also eminently suitable for floor toms bass drum etc.and, with its inherent ability to withstand extremely high sound pressure levels, can also be used for close miking of musical instruments or speaker cabinets.[/b] Features:[/b][/font][/size][list] [*][size=2][font=Arial][b]Hypercardioid polar pattern[/b][/font][/size] [*][size=2][font=Arial][b]High SPL capability[/b][/font][/size] [*][size=2][font=Arial][b]Exceptional gain-before-feedback[/b][/font][/size] [*][size=2][font=Arial][b]Superb transient response[/b][/font][/size] [*][size=2][font=Arial][b]Rugged construction[/b][/font][/size] [/list] [size=2][b]Specifications:[/b][/size][list] [*][size=2][font=Arial][b]Transducer type . . . . . . . . . . . . . Dynamic[/b][/font][/size] [*][size=2][font=Arial][b]Operating principle . . . . . . . . . . Pressure gradient[/b][/font][/size] [*][size=2][font=Arial][b]Frequency response:[/b][/font][/size] [*][size=2][font=Arial][b]Close miking. . . . . . . . . . . . . . . . 15 - 18,000 Hz[/b][/font][/size] [*][size=2][font=Arial][b]Distant miking . . . . . . . . . . . . . . 40 - 16,000 Hz (measured at 1 metre)[/b][/font][/size] [*][size=2][font=Arial][b]Polar pattern . . . . . . . . . . . . . . . Hypercardioid[/b][/font][/size] [*][size=2][font=Arial][b]Side attenuation[/b][/font][/size] [*][size=2][font=Arial][b]at 110? (1 kHz) . . . . . . . . . . . . . . > 25 dB[/b][/font][/size] [*][size=2][font=Arial][b]Open circuit voltage[/b][/font][/size] [*][size=2][font=Arial][b]at 1 kHz . . . . . . . . . . . . . . . . . . . 2 mV/Pa[/b][/font][/size] [*][size=2][font=Arial][b]Magnetic field suspension . . . . > 20 dB at 50 Hz[/b][/font][/size] [*][size=2][font=Arial][b]Nominal output impedance . . . 280 ohm[/b][/font][/size] [*][size=2][font=Arial][b]Load impedance . . . . . . . . . . . . > 1 K ohm[/b][/font][/size] [*][size=2][font=Arial][b]Male connector . . . . . . . . . . . . . 3-pin XLR connector[/b][/font][/size] [*][size=2][font=Arial][b]Dimensions . . . . . . . . . . . . . . . . . Length: 107 mm[/b][/font][/size] [*][size=2][font=Arial][b]Shaft diameter: 29/24 mm[/b][/font][/size] [*][size=2][font=Arial][b]Head diameter: 66/60 mm[/b][/font][/size] [*][size=2][font=Arial][b]Weight without cable . . . . . . . . 380 g[/b][/font][/size] [/list] £100 plus postage [b]SOLD[/b] Edited June 11, 2013 by joegarcia Link to comment Share on other sites More sharing options...
joegarcia Posted February 6, 2013 Author Share Posted February 6, 2013 Crikey, these all already have a list of people in line for them. I should post ads on my Facebook more often. Link to comment Share on other sites More sharing options...
essexbasscat Posted February 6, 2013 Share Posted February 6, 2013 Pm'd anyway Link to comment Share on other sites More sharing options...
joegarcia Posted February 9, 2013 Author Share Posted February 9, 2013 SM58's sold, Beyer still available. Link to comment Share on other sites More sharing options...
joegarcia Posted February 17, 2013 Author Share Posted February 17, 2013 Beyerbump. Link to comment Share on other sites More sharing options...
joegarcia Posted February 19, 2013 Author Share Posted February 19, 2013 Bump. Link to comment Share on other sites More sharing options...
joegarcia Posted March 19, 2013 Author Share Posted March 19, 2013 Bump for the Beyer. Will include postage. Link to comment Share on other sites More sharing options...
joegarcia Posted March 19, 2013 Author Share Posted March 19, 2013 Should also say I'd be interested in trading for a compact interface (Roland, Focusrite, Edirol, Presonus etc). Link to comment Share on other sites More sharing options...
carlsim Posted March 20, 2013 Share Posted March 20, 2013 fancy a line 6 UX2 in part ex?? Link to comment Share on other sites More sharing options...
joegarcia Posted March 20, 2013 Author Share Posted March 20, 2013 Sorry, not what I'm after ta. Link to comment Share on other sites More sharing options...
joegarcia Posted March 25, 2013 Author Share Posted March 25, 2013 Sorted for an interface now but will consider other trade suggestions or offers. Link to comment Share on other sites More sharing options...
Recommended Posts