Jump to content
Why become a member? ×

Putting bass cab on a pole?


jezzaboy
 Share

Recommended Posts

No not someone from the former Eastern Bloc before someone says it!


I have a TC 2x10 cab that weighs 20kg. I was thinking, why not mount it on a pa tripod that is designed for speakers? Not too high, about chest height?

You would have no booming due to a wooden stage, you would be able to hear it better and mabye it will carry the sound better?

I realise this is likely a mental idea but hey ho!

Link to comment
Share on other sites

I was thinking more or less the same thing the other day:

[url="http://basschat.co.uk/topic/198398-class-d-active-full-range-pa-speaker-for-bass/page__hl__pa%20cab%20for%20bass"]http://basschat.co.uk/topic/198398-class-d-active-full-range-pa-speaker-for-bass/page__hl__pa%20cab%20for%20bass[/url]

And went for the budget option!

[url="http://basschat.co.uk/topic/198605-folding-ampcab-stand-l399/page__hl__lidl+crate__fromsearch__1"]http://basschat.co.uk/topic/198605-folding-ampcab-stand-l399/page__hl__lidl+crate__fromsearch__1[/url]

Link to comment
Share on other sites

raising the cab will have two effects. Putting the cab at ear level will mean you will hear more of the upper frequencies and hence tell you more about how you are playing. It will also sound louder to you relative to the rest of the band. Secondly having the speaker on the floor means the floor acts like a big sonic mirror giving you an extra 3dB of bass. Moving it this high will reduce this effect and also cause some frequency dropouts dependent upon the height. Your audience will hear a bit less bass. Probably this will all just clean up your sound but you might need to eq differently and if you lack power floor and wall reinforcement is useful, Try it but as others have said a cab stand may be more practical.

Link to comment
Share on other sites

I tried amp stands, they all tilt the cab though, not great with the rack and car stereo on top (or on the floor in bits down the back after a few minutes). Keyboard stands work ok but they can make everything a bit too high up (especially with a vertical 2x12). Personally, I wouldn't trust a £3.99 plastic crate from Lidl with £1200 worth of amp and cab - maybe I'm an idiot, but there it is.

Link to comment
Share on other sites

As Phil Starr said you could find yourself losing frequencies. I tried my BF Midget on a keyboard stand and lost so much volume that for gigs I had to drive it until it was farting out. No good at all. And that's normally a very loud cab.

Raising the cab 18" or so works ok, although floor level with a tilt is better.

Link to comment
Share on other sites

I used an 'X' type keyboard stand for a while in my endeavours to conquer double bass feedback. The feedback was reduced but the sound was seriously lacking in those low mid and bass frequencies that made up the woody DB sound - sort of twangy and nasal. Bleugh.

I really didn't like it, so I set about learning how to properly EQ my sound and use the high pass filter (HPF) on my peramp. I've also bought a GRAMMA pad for those hollow/wooden floors so I can still get acoustic coupling without the boominess that a hollow stage gives.

It's still not 100% great sound every gig, but I rarely have a problem with feedback these days

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...