FS Pedulla Thunderbass ET 5 cocobolo (trade for Fender P bass possible)

[Jebri]

I am downsizing my collection so available is my Pedulla Thunderbass from 1997. I am the second owner. The trussrod head has been modified by the previous owner, so no need for the Pedulla special key.

Comes with original [color=red][size=4]Pedulla[/size][/color] case.

£1,500

Jean-Claude

[b][u]Body [/u][/b][b][u]Material ET[/u]: [/b]laminated wings set to five piece neck that includes two thin strips of Bubinga. Soft maple back with cocobolo top
[b]NECK:[/b] Capillary (neck-through), 3 piece maple laminate (T), 5 piece laminate (ET)
[b]SCALE LENGTH:[/b] 34 inches
[b]FINGERBOARD: [/b]Ebony
[b]NUMBER OF FRETS:[/b] 24/24 inlaid white markers, (plus finish on the fretless Buzz
fingerboard)
[b]INLAY:[/b] Mother of Pearl, 5mm dots
[b]NUT:[/b] Bone
[b]TRUSS ROD:[/b] Single rod, double-acting adjustable with two stiffening bars
[b]STRINGS:[/b] .030, .045, .065, .080, .100, .128
[b]WEIGHT:[/b] range from 9 to 10 lbs
[b]HARDWARE COLOR: [/b]Gold
[b]BRIDGE:[/b] 3-way adjustable machined brass with adjustable saddles
[b]MACHINE HEADS:[/b] M.V. Pedulla/Gotoh
[b]STRAP PINS:[/b] Gotoh
[b]PICKUPS:[/b] Made for M.V. Pedulla by Bartolini: SB
[b]ELECTRONICS:[/b] Active, Bartolini
[b]CONTROLS:[/b] volume, pan, bass boost/cut, Thunderguts low mid switch (toggle)
[b]CONTROL KNOBS: [/b]Anodized aluminum (black with marker)
[b]FINISH:[/b] Oil urethane satin

Edited April 4, 2013 by Jebri