Jump to content
Why become a member? ×

USA Standard vs Special vs Highway One Precision Bass


jimbojimbo
 Share

Recommended Posts

Hi guys,

I'm looking to buy a new bass. Primarily I'm a guitarist, but with my job I play a lot of bass and need to get a decent one - I produce music.

Ideally, I'd like a USA P Bass, but the budget won't stretch to a new one, so I'm looking second hand and have around £500-£600 (max) to spend.

I've been doing some research but I'm still a little unsure of a few things. Would someone mind throwing me a few straight-forward bullet points, or something, to illustrate the difference between the types:

USA Standard / Special / Highway One.

I've seen a bunch around and getting confused as to what to do!
I'm not only looking for USA ones, I know they're the best, but I know that there are certainly some decent mex/Jap ones about, especially the reissues.

Of course, correct me/educate me where you can!!

Thanks!

Link to comment
Share on other sites

As above really. The introduction of the Specials/HW1s was to make more affordable US versions. So essentially, reductions/changes that brought the prices down. As going used and not new, the difference isn`t so much.

My particular recommendation is the 2008 onwards US Standard. I`ve had two of these and both have been incredibly good (my current main bass is one of these). They come in fairly light, have great resonance, lightweight tuners, hi-mass bridge, just a great all round bass.

Link to comment
Share on other sites

An honest question to the OP .... why limit yourself to just a P ? I can quite understand why you want the P tone, as it is the best, but you could pick up a nice PJ configuration bass for the same money and have extra very useful tones for more versatility for your recording.
There are a number of Fender Precision specials/deluxes out there (both MiM and MiA) that are PJ. Also the Yamaha BB series basses, G&L SB-2 tributes etc. I would also say don't discount non-Fenders. In my experience the "precision" sound from something like a Yamaha BB or a G&L SB-2 and, I suspect, a number of other PJ basses out there, is well within the variety of the range of "precision" tones that different Fender precisions will offer.

Just a thought.

Link to comment
Share on other sites

Essentially the highway/special series don't have. hipshots (they have the Mexican style tuners) neck tints. hard cases. or high mass bridges, with the exception of the highway ONE which sports a BadAssII as standard. Highway 1's and specials have the BBOT. Both the HW ONES & the specials have posiflex graphite support rods. HW 1's have standard skunk necks. Only the US has through body stringing as previously mentioned (no biggy if your planning using flats as flats go through the bridge anyway) pickups are a bit of an enigma on the highway series though apparently they a US pickup made specifically for the highway series.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...