DanD Posted May 12, 2013 Share Posted May 12, 2013 (edited) Cab is in good condition, not looking to trade, collection only, £400 o.n.o Here's some official company info General info: All NeoLite speaker cabinets are made out of very strong but lightweight, void free birch and poplar plywood, dowelled joint construction and internal bracing. All woodworking is done with ultra precise cnc-machines. The NeoLite cabinets are loaded with the latest generation custom-made neodymium drivers. The drivers are absolute state-of-the-art; constructed from a cast aluminum frame, neodymium magnet assembly, unique coil and magnet cooling design, waterproof cone material, linear frequency response, high power- and sensitivity-ratings. Cabinets with a tweeter feature a custom-made filter with tweeter protection circuit and a high frequency attenuator on the back panel. Here you will also find two Neutrik® speakon/6.3mm jack-combo connectors linked parallel. All speaker cabinets are sealed airtight from the inside so the air will only enter or leave the cab thru the tuned port-tube mounted on either the front or back or both. All speaker cabinets are covered with black carpet, which will protect your cabinet for years to come. Every speaker cabinet is hand-made by Marc Vanderkley.[list] [*][b]Model:[/b] 112EXT [i]NeoLite[/i] [*][b]Configuration:[/b] 1x12” Neodymium driver + tweeter [*][b]Power:[/b] 300 Watts AES* [*]*2 Hours test according to AES 2-1984 Rev. 2003 [*][b]Impedance:[/b] 8 Ohms [*][b]Freq. response:[/b] 40 Hz – 16 kHz [*][b]Sensitivity:[/b] 100 dB 1W @ 1m [*][b]Dimensions:[/b] H x W x D, 41 cm x 50 cm x 41 cm [*][b]Weight:[/b] 15 Kg / 33 lbs [/list] Edited May 23, 2013 by DanD Link to comment Share on other sites More sharing options...
funkypenguin Posted May 17, 2013 Share Posted May 17, 2013 is this cab still available? Link to comment Share on other sites More sharing options...
DanD Posted May 19, 2013 Author Share Posted May 19, 2013 Yep, still available. Link to comment Share on other sites More sharing options...
funkypenguin Posted May 20, 2013 Share Posted May 20, 2013 PM'd Link to comment Share on other sites More sharing options...
Recommended Posts