AngelLaHash Posted May 28, 2013 Share Posted May 28, 2013 (edited) Just thinking out here, B1M Ohm Pot, opened up and SLICED down the middle so got two sides of a B500K One side can have 47nF and the other side say 100nF then to earth with the both of them the Middle is the Input for the Tone Controls <Dont know if it would work on a A1M as i think its two resistance inner ring and a outter ring> Making two Tone Controls, instead of going 0-10, its 0-5 and 5-10 So 0-5 is the range for the 47nF and 5-10 is the range for the 100nF As you cross over it goes to the MAX 500K and down on ever said as it is a B1M it should be Liner Well going to try it out in the morning with a 2p2t switch To give me a mix of 104/49 , 22/10 and 47/22 Values 82/39 , 22/10 and 25/12 If it works'so want to call it the angel split XXX Edited May 29, 2013 by AngelLaHash Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.