Kevin Dean Posted June 13, 2013 Share Posted June 13, 2013 I'm thinking of getting one of these to use with my MB little rocker . Should I connect it via the effects send & Return or in line into the front input ? Quote Link to comment Share on other sites More sharing options...
Tech21NYC Posted June 19, 2013 Share Posted June 19, 2013 We usually recommend going into the efx "return" and bypassing your amp's preamp section. The RBI is a dedicated preamp and running it into the front of your amp you will be stacking the two pre's together. The two EQ's may tend to fight each other making it difficult to dial in. This is not to say you can't run it this way. Just set your amp's tone controls for a more flat setting. You can also use an A/B box and use each preamp separately through your amp as well. Quote Link to comment Share on other sites More sharing options...
Kevin Dean Posted June 19, 2013 Author Share Posted June 19, 2013 Thanks Quote Link to comment Share on other sites More sharing options...
Kevin Dean Posted June 19, 2013 Author Share Posted June 19, 2013 as I have a 3000w stereo power amp that I only use half of it for the PA I could use the RB1 & the other half of the amp to power the bass speaker ? Quote Link to comment Share on other sites More sharing options...
Tech21NYC Posted June 20, 2013 Share Posted June 20, 2013 [quote name='Kevin Dean' timestamp='1371677461' post='2116971'] as I have a 3000w stereo power amp that I only use half of it for the PA I could use the RB1 & the other half of the amp to power the bass speaker ? [/quote] Sure, that would work. Many players use power amps with preamps. Just take care that you don't send too much power to your cab. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.