aende Posted June 21, 2013 Share Posted June 21, 2013 Makes my 2 x 4 ohm cabs look like 1 x 8 ohm cab to my amp! Nice if your amp won't handle a 2 ohm load! A big thank you to OBBM; exceptional quality, works well and he is a nice bloke to deal with - Cheers Dave. Quote Link to comment Share on other sites More sharing options...
obbm Posted June 21, 2013 Share Posted June 21, 2013 It was a pleasure Jeff. All the sockets are Speakon/Jack combos so that you can use any mix of connectors. There is another version which is a one to two splitter which allows you to run two cabs from an amp with a single outlet. Useful if the cabs have single input connectors. Quote Link to comment Share on other sites More sharing options...
peteb Posted June 21, 2013 Share Posted June 21, 2013 Now that is a good idea... Quote Link to comment Share on other sites More sharing options...
steve-soar Posted June 21, 2013 Share Posted June 21, 2013 I like that very much. Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted June 21, 2013 Share Posted June 21, 2013 The next time I see a cheap genz neox2x12t cab I'm going to tempted! 4x12, two adjustable tweeters and 900watts Quote Link to comment Share on other sites More sharing options...
molan Posted June 21, 2013 Share Posted June 21, 2013 Ok, so I'm a complete dumbass when it comes to stuff like this Would it be possible to have something similar that makes 2 x 4 ohm cabs appear as a single 4 ohm load to an amp? Quote Link to comment Share on other sites More sharing options...
stingrayPete1977 Posted June 21, 2013 Share Posted June 21, 2013 (edited) In parallel as normal either from two amp outputs or linked cab to cab the impedance halfs hence most people have a pair of 8 ohm cabs and a 4 ohm minimum head, in series the impendances are added up so you would get 8 ohms which if all the amp gurus on here are correct then the fact your head is running at 8 ohm rather than 4 won't matter a jot but double the amount of cabs will, a lot! Plus you can always get 4 4x12 cabs and another series box for some 16x12 action Depending on your cabs you could put a switch on them to make the cabs series wired taking them up to 8 ohm then use them as normal giving the head a 4 ohm load. Edited June 21, 2013 by stingrayPete1977 Quote Link to comment Share on other sites More sharing options...
obbm Posted June 21, 2013 Share Posted June 21, 2013 [quote name='molan' timestamp='1371851738' post='2118927'] Ok, so I'm a complete dumbass when it comes to stuff like this Would it be possible to have something similar that makes 2 x 4 ohm cabs appear as a single 4 ohm load to an amp? [/quote] Sadly not Barry, but you can run the two cabs at 8-ohms and enjoy the extra air movement. Up until recently I've been running 2 Schroeder 1212Ls together as 8-ohms and never got anywhere near running out of steam. Quote Link to comment Share on other sites More sharing options...
chris_b Posted June 22, 2013 Share Posted June 22, 2013 Dave, Can you make a box that works with an 8 ohm cab and a 4 ohm cab? Quote Link to comment Share on other sites More sharing options...
obbm Posted June 22, 2013 Share Posted June 22, 2013 It makes no difference what the impedances of the cabs are. Putting them in series will just add them so 8 + 4 will give 12-ohms. One of the things you need to consider however is whether the two cabs are in-phase or not but that can be easily checked. Quote Link to comment Share on other sites More sharing options...
gafbass02 Posted June 22, 2013 Share Posted June 22, 2013 That is an awesome little box! Quote Link to comment Share on other sites More sharing options...
BassTractor Posted June 22, 2013 Share Posted June 22, 2013 [quote name='obbm' timestamp='1371886385' post='2119068'] whether the two cabs are in-phase or not [/quote] Bah! Who cares. best, bert Quote Link to comment Share on other sites More sharing options...
aende Posted June 27, 2013 Author Share Posted June 27, 2013 Used the cable splitter last night at rehearsal - GK1001RB ii and 2 x 4ohm 210 cabs. Works a treat! Quote Link to comment Share on other sites More sharing options...
obbm Posted June 27, 2013 Share Posted June 27, 2013 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.