Jump to content
Why become a member? ×

Ashdown MI cabs


devonrex
 Share

Recommended Posts

I looked for MI 1x10 and 1x12 cabs info on Ashdown home page but there is no frequency range of both cabs.
Does anyone know What are frequency ranges of both cabs and what is impendance?
On page says 1x10 is 4 ohm and 1x12 is 8 ohms but here it says different.
http://www.session.de/ASHDOWN-Mi-10-Extension-Cab.html?listtype=search&searchparam=ashdown
http://www.session.de/ASHDOWN-Mi-12-Extension-Cab.html?listtype=search&searchparam=mi%20112

Help me please.

Link to comment
Share on other sites

[quote name='devonrex' timestamp='1372527143' post='2126878']
I looked for MI 1x10 and 1x12 cabs info on Ashdown home page but there is no frequency range of both cabs.
Does anyone know What are frequency ranges of both cabs and what is impendance?
On page says 1x10 is 4 ohm and 1x12 is 8 ohms but here it says different.
[url="http://www.session.de/ASHDOWN-Mi-10-Extension-Cab.html?listtype=search&searchparam=ashdown"]http://www.session.d...chparam=ashdown[/url]
[url="http://www.session.de/ASHDOWN-Mi-12-Extension-Cab.html?listtype=search&searchparam=mi%20112"]http://www.session.d...hparam=mi%20112[/url]

Help me please.
[/quote]

You are correct. It does look unusual. Ashdown's reference on the web-site to pairing the Mi10 with the MiBass 2.0 Amp head doesn't look practical as the two speaker outlets are 8 ohms? Putting two 8 ohm cabs together will give the minimum specified load to the amp of 4 ohms.

Send Ashdown an e-mail from their "Contact" link. They will confirm the impedance of the two speakers.

As for "what is impedance" have a look at the pinned thread - Amps & cabs - Impedance etc.

Balcro.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...