danbowskill Posted August 18, 2013 Share Posted August 18, 2013 hope I'm not being a spaz here! ..... thinking of getting this head, I use a 4ohm single Ampeg 6x10 cab . the head is rated 500w at 4ohm but the rear of the amp shows 2 speaker outs at 8ohms..... does this mean I won't get all 500w plugging my cab into 1 of these? ( usually you use 2 8ohm cabs to make it 4ohms?) I probably will get all 500?..... just a niggle I need to check. thanks Quote Link to comment Share on other sites More sharing options...
clauster Posted August 18, 2013 Share Posted August 18, 2013 Spaz away man! It's fine to plug a 4 ohm cab into either of the speaker outputs and you will release al 500 watts. Just don't panic if you accidentally plug into the effects send or return. That was a spaztastic 5 minutes! Quote Link to comment Share on other sites More sharing options...
danbowskill Posted August 18, 2013 Author Share Posted August 18, 2013 haha cheers mate, I thought it would be cool. Quote Link to comment Share on other sites More sharing options...
geoffbyrne Posted August 18, 2013 Share Posted August 18, 2013 .....just don't plug a 4 Ohm cab into both simultaneously...... G. Quote Link to comment Share on other sites More sharing options...
Conan Posted August 18, 2013 Share Posted August 18, 2013 [quote name='clauster' timestamp='1376814612' post='2179298'] Just don't panic if you accidentally plug into the effects send or return. [/quote] You too? Quote Link to comment Share on other sites More sharing options...
clauster Posted August 18, 2013 Share Posted August 18, 2013 [quote name='Conan' timestamp='1376830244' post='2179590'] You too? [/quote] Yep, was on the verge of reaching for the screwdrivers when I realised what I'd done Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.