Jump to content
Why become a member? ×

Bridges: Schaller vs Gotoh vs Baddass. GO!


ChickenKiev
 Share

Recommended Posts

Can't speak of Schaller as I haven't used one but I have fitted Gotoh 201 and Badass bridges to Fenders. I have also fitted one you don't mention - the Hipshot A style Fender retro fit. I find all of them more comfortable as the end of the bridge is where I rest the heel of my hand and I find the BBOT is a little too sharp to rest on. I like the sturdiness of all of them. Whether or not there is a difference in sustain/tone is arguable, but that isn't my chief reason for fitting them. From an engineering point of view I'd say the Hipshot is head and shoulders above the other two and is by some way my favourite. Best value for money is the Gotoh 201. Actually, no, the best value for money was a generic Gotoh copy I bought on ebay for around £12. It did much the same job as all the others for what I required of it - not as well made but then it wasn't very expensive. But my best and favourite bass has the Hipshot fitted.

Edited by Paul S
Link to comment
Share on other sites

I like the look of the Babicz bridges. It's about which one has the best adjustments, the easiest string placement & which one you like the look of the most.

The ABM ones are also well made, but they're redonkulously priced.

Link to comment
Share on other sites

No idea how much the ABM bridge costs. The two basses I have it on came with it fitted already. I have to say it's like the Schaller but a bit more elegant (subjective I know) and is slot loading so you don't have to worry about threading very fat strings through holes they might not fit into.

Link to comment
Share on other sites

I like slot loading bridges.

As for the choice of Schaller, Gotoh and Badass...it would be a Gotoh for me purely on how they look. They just look well made and like proper engineering.

I really don't like the look of those big Badass bridges on Fender style basses, it looks out of balance.

Link to comment
Share on other sites

I bought a Schaller 2000 bridge from a member here a few years back and just transferred it to my MIM jazz bass this afternoon. It is really well made, solid and fully adjustable. The difference in the sound is noticeable - as it was on the bass it was fitted to previously.......I've not seen many of them around but they are definitely worth looking at.

Link to comment
Share on other sites

[quote name='BanditSid' timestamp='1376851600' post='2179984']
I bought a Schaller 2000 bridge from a member here a few years back and just transferred it to my MIM jazz bass this afternoon. It is really well made, solid and fully adjustable. The difference in the sound is noticeable - as it was on the bass it was fitted to previously.......I've not seen many of them around but they are definitely worth looking at.
[/quote]

I have one of these on a Hartke XL-4 Bass. Terrible design IMO and I can't see what advantages it offers over the 3D other than the opportunity to spend much longer setting up the string spacing and intonation.

Link to comment
Share on other sites

[quote name='BigRedX' timestamp='1376852112' post='2179992']
I have one of these on a Hartke XL-4 Bass. Terrible design IMO and I can't see what advantages it offers over the 3D other than the opportunity to spend much longer setting up the string spacing and intonation.
[/quote]
I agree about it being difficult to setup, especially the intonation adjustment, but I got it at a good price so it's worth the hassle over a new bridge at a much higher price. Once it is setup it can be left alone for the most part.

Link to comment
Share on other sites

I just fitted a Hipshot B style to my Jazz bass, beautifully made piece of kit, comes in aluminium or brass. I used to have a schaller 2000 series on an old bass, again really good bridge but I found it overly fiddly. Also previously had a Badass V on a Jazz, I thought it was awful, badly cast saddles and base plate, absolute rubbish compared to the Schaller and Hipshot but I could have just had a bad one.

Edited by NJE
Link to comment
Share on other sites

Thanks for the help guys. So most of you are saying the Schaller 3D.

I'll say it again because I don't think anyone has seen my later post.

I was asking about the holes in the back of the bridges for putting the strings through. How big are they specifically on the Schaller? I use two basses for my band with drop C and drop B tunings. With my current bridge I've had to drill holes to fit the heavy gauge strings (45-105 for C and 50-110 for B ) through the back. I don't mind doing it with the Schaller but I'd rather not if I can avoid it if you know what I mean.

Edited by ChickenKiev
Link to comment
Share on other sites

You get away with a 110 for B?

You must have the lightest touch ever! IMO 110 isn't a B string it's a heavy E. I need at least 128 for B.

According to the [url=http://guitar-bridge.com/hp135061/Bassbridge-3D-4.htm]technical drawing[/url] on the Schaller web site the holes for the strings are 4.6mm in diameter.

Link to comment
Share on other sites

[quote name='BigRedX' timestamp='1376985035' post='2181696']
You get away with a 110 for B?

You must have the lightest touch ever! IMO 110 isn't a B string it's a heavy E. I need at least 128 for B.

According to the [url=http://guitar-bridge.com/hp135061/Bassbridge-3D-4.htm]technical drawing[/url] on the Schaller web site the holes for the strings are 4.6mm in diameter.
[/quote]

I don't have the softest touch to be honest!

It gives a kinda clanky, slightly buzzy sound (not too much buzz though. None of my fretted notes get choked or anything like that). It's more like a buzz saw than a smooth, creamy tone.

I usually EQ with a bit more bass to give it the required oomph. Because admittedly it's a little thin-sounding without.

All in all it sounds surprisingly rather nice when running your bass through a distortion pedal, in my opinion. Plus I can bend the first fret to buggery, which is handy in my genre as a lot of it has binary tab :P. I can get some good vibrato.

It's not everyone's thing but it serves me well for the music my band write and play :).

I'll find the diameter of the strings I use and see if that'll fit in the Schaller.

Link to comment
Share on other sites

Right well my current bridge must have had like 2.0mm holes before I drilled them.

It's a cheap and nasty thing. Cost me about £18..lulz. Only bought it because it looked cool. I didn't know any better at the time.

So I'm okay to go ahead and spend my pennies on the Schaller?

Edited by ChickenKiev
Link to comment
Share on other sites

[quote name='discreet' timestamp='1377109695' post='2183528']
Is the Schaller a straight replacement on a Fender? Or do you need to drill extra holes..?
From what I can see it's a three-hole fitting.
[/quote]

No, it's not a straight replacement on a Fender. The 3D bridge has 3 screw positions which [u]don't[/u] line up with those on a Fender bass. You would need to drill.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...