Ether Posted September 27, 2013 Share Posted September 27, 2013 (edited) [attachment=144771:MarkBass1.jpg] [left][size=4][u][b][color=#000000]BIG BANg[/color][/b][/u][b][color=#000000] [/color][/b][color=#000000]Has some Cosmetic marks on the top apprt from that in excellent working order [/color][/size][/left] [left][color=#020202][font=Georgia, Arial, Verdana][size=3][b]INPUTS[/b] INPUT - impedance 2 Mohm, max. voltage 15 Vpp AUX IN EFFECT RETURN - impedance 33 Kohm, max. voltage 10 Vpp[/size][/font][/color][/left] [left][color=#020202][font=Georgia, Arial, Verdana][size=3][b]CONTROLS[/b] GAIN MASTER VOLUME LINE OUT LEVEL HEADPHONE LEVEL CONTROL GROUND LIFT - switch on rear panel PRE/POST EQ - switch on rear panel MUTE - footswitch[/size][/font][/color][/left] [left][color=#020202][font=Georgia, Arial, Verdana][size=3][b]EQUALIZATION[/b] LOW center frequency: 40 Hz; level: ±16 dB LOW MID center frequency: 360 Hz, level: ±16 dB HIGH MID center frequency: 800 Hz, level: ±16 dB HIGH center frequency: 10 kHz, level: ±16 dB [b]FILTER SECTION[/b] (with footswitch) VPF (Variable Pre-shape Filter) center frequency 380 Hz (cut) VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz (cut) [b]OUTPUT[/b] LINE OUT balanced XLR, max. voltage 20 Vpp EFFECT SEND unbalanced, max. voltage 20 Vpp (pre-EQ) TUNER OUT unbalanced, max. voltage 2 Vpp SPEAKER OUT speakon/1/4" combo, 1/4" HEADPHONE OUT [b]OTHER[/b] WEIGHT 4.74 lbs / 2.15 kg DEPTH 10.04 in. / 25.5 cm WIDTH 8.94 in. / 22.7 cm HEIGHT 2.56 in. / 6.5 cm OUTPUT POWER 300W RMS @ 8 ohm, 500W RMS @ 4 ohm POWER REQUIREMENT 100/120V; 230V; 240V 50/60Hz[/size][/font][/color][/left] [left][color=#020202][font=Georgia, Arial, Verdana][size=3]___________________________________________________________________________[/size][/font][/color][/left] [left][color=#020202][font=Georgia, Arial, Verdana][size=3][u][b][size=4][color=#000000]TRAVELER 121[/color][/size][/b][/u][b][size=4][color=#000000] [/color][/size][/b][size=4][color=#000000]As good as new hardly used grab your self a bargin [/color][/size][/size][/font][/color][/left] [left][color=#020202][font=Georgia, Arial, Verdana][size=3]IMPEDANCE 8 ohm SPEAKER SIZE 1x12 in. BASS PORT rear TWEETER 1" compression driver with custom horn POWER HANDLING 400W RMS (AES Standard) CROSSOVER FREQUENCY 3.5 kHz FREQUENCY RESPONSE 40 Hz to 20 kHz SENSITIVITY 99 dB SPL WEIGHT 34.61 lbs / 15.7 kg HEIGHT 15.35 in. / 39 cm WIDTH 23.39 in. / 59.4 cm DEPTH 17.05 in. / 43.3 cm[/size][/font][/color][/left] Edited October 3, 2013 by Ether Link to comment Share on other sites More sharing options...
Recommended Posts