AngelLaHash Posted October 3, 2013 Share Posted October 3, 2013 Get a Pot (Dual or Single) Take it apart Paint over the OUTER Track with Conductive Paint Cut the Track in the middle with a thin hair line crack (making sure each side isnt connection any more) and put it all back to gether, Making a 1P2T Switch, Left and Right lugs one say the outputs and the Common the middle lug is the Common. Would this stop you POPING sound that you get from a, Spring loaded switch (may not have a SPRING so to speak but a way of flipping from one connector to another) And if you want a 2P2T you would need to have a Dual Pot and do the same to each plate. Quote Link to comment Share on other sites More sharing options...
paul_5 Posted October 3, 2013 Share Posted October 3, 2013 If an effect is popping when you switch it on it may be a case of increasing the input capacitor value to eliminate it. I like your idea though! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.