Annoying Twit Posted October 9, 2013 Share Posted October 9, 2013 What is this Ibanez 'Mono-rail bridge IV'. In the picture it looks like a fairly normal bridge with separate saddles. Do these really make a difference in string isolation compared to a standard single bridge? Would this help reduce the amount that other strings will ring when a string is plucked? http://www.guitarguitar.co.uk/bass_guitars_detail.asp?stock=13020410594316 Quote Link to comment Share on other sites More sharing options...
Lfalex v1.1 Posted October 10, 2013 Share Posted October 10, 2013 (edited) A good damping technique is probably at least as important, be it left or right-handed (or both). If that's already in place, a mono-rail bridge might help eliminate that last 1% of cross-talk between strings. I tend to view them as a cost-effective means for manufacturers to make ERBs using hardware that's already available to them. A fine example being the Ibanez 7 string you posted. It'll use the same bridge hardware as the 4,5 or 6 strings. Just more of it. No need to source or manufacture a 7 string unit. Edited October 10, 2013 by Lfalex v1.1 Quote Link to comment Share on other sites More sharing options...
Annoying Twit Posted October 10, 2013 Author Share Posted October 10, 2013 That's pretty much what I was thinking about being able to build basses with differing numbers of strings with the same hardware. My damping is improving, but on my six-string, it still has some way to go. I am sort of tempted to replace the bridge on my Shine bass with separate saddles. At the moment that's more or less 'just because'. But if the separate saddles made a significant difference, this would raise the priority of that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.