Jump to content
Why become a member? ×

bass gone distorted :S:S:S


darbs
 Share

Recommended Posts

i'v been playin my tanglwood warrior 3 (i no. . .piece of sh*t) for about 5 years and its been playin great but recently it has gone distorted:S:S:S iv cleaned the pots and hecked the electronics and they seem to be alrite tryed a different bass through the amp i'm using and the amps fine any ideas? ? ? ? also hen i turn the volume up full on both pick ups i can get even more volume and power if i turn the down slightly any ideas? help will be much appriciated!

Link to comment
Share on other sites

[quote name='Crazykiwi' post='226844' date='Jun 25 2008, 06:27 PM']er, change the battery?[/quote]
That was my first thought too, but that's a passive bass. Unless it's been modded, of course.

Link to comment
Share on other sites

I'd tend to suspect that the pots are worn, if only because you're getting more volume by turning down slightly. If there's access at the back of the pot you could try switch cleaner, but you'd probably be better off replacing the pots.

Another thing to check and clean is the jack socket. I've never known distortion to be an issue with a dirty jack, but I had a sudden loss of bottom end on one bass which turned out to be down to an imperceptably thin layer of lacquer like substance.

Link to comment
Share on other sites

[quote name='bnt' post='226855' date='Jun 25 2008, 06:51 PM']That was my first thought too, but that's a passive bass. Unless it's been modded, of course.[/quote]
Well he did mention checking the electronics. Passive basses don't really have electronics to speak of.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...