Zoom b3

[gub]

Am having problems working out how to switch from one effect to another without going through all the others. I would like a delay for the start of one song we do but only for the start, I then want to go to A5 , am I just being thick ?

[discreet]

You can have up to 26 patches (A-Z) in an order cycle of your choosing.
I used to do it in 'Edit and Share' as far as I can remember - I don't have a B3 any more.

[pete.young]

Can't remember which effects are in a5 but if there is one that you don't use or need replace that with the delay and save your new patch on top of one that you don't use.

[discreet]

It's something like this, but I can't remember how you set it up. You don't have to replace or delete patches to do it.
Can any B3 owners on here enlighten us?

Where's dood? He'll know!

[pete.young]

I don't think you can do that on a B3. I never did while I had mine, and it's not mentioned in the manual. You can scroll through patches one at a time or jump from one bank to the next but I don't think there's a pick-and-mix function to put your favourites into a chain.

It is possible to do that sort of thing in 'Edit and Share' with the MS60B though - perhaps you're getting the two confused?

To the OP - havling looked at A5, it uses two effects, SansAmp and Punch Factory, to achieve the sound - try replacing the EQ on the userland patch with a delay and switch it off after the first few bars.

[NoirBass]

As above, the graphic from discreet is for the MS-60B. The B3 will only scroll through one at a time.

[gub]

Cheers chaps, have been having a mess about with it for the last few days, all is much clearer

[spacey]

they do some software on the zoom site, you can plug the usb in and play around on the PC, much easier.