DiMarco Posted November 24, 2013 Share Posted November 24, 2013 What do you think? Quote Link to comment Share on other sites More sharing options...
DiMarco Posted November 24, 2013 Author Share Posted November 24, 2013 Here she is with the original image that served for the mockup job. Body is slimmer as it was looking horrible (in a humpback whale fashion) otherwise. Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted November 24, 2013 Share Posted November 24, 2013 I would make the bit where the top bout starts raising again a continuation of the line of the bottom as it goes up towards the waist, and then curve it down at the same angle as the bottom.... If I were doing to I would have a wenge neck- so it sounded different to the thumbSC anyway it already looks better than war wicks thumbSC! Quote Link to comment Share on other sites More sharing options...
Jellyfish Posted November 24, 2013 Share Posted November 24, 2013 It's not the worst singlecut I've seen... Quote Link to comment Share on other sites More sharing options...
LeftyJ Posted November 25, 2013 Share Posted November 25, 2013 Looks nice! Makes a lot more sense to me than a Thumb SC, which looks HUGE. This one is actually quite elegant! Quote Link to comment Share on other sites More sharing options...
Roland Rock Posted November 25, 2013 Share Posted November 25, 2013 An improvement for sure, a bit ACG Quote Link to comment Share on other sites More sharing options...
Cosmo Valdemar Posted November 25, 2013 Share Posted November 25, 2013 I generally don't like extreme singlecuts (LP/Tele are ok) but that one really works - bravo! Quote Link to comment Share on other sites More sharing options...
KevB Posted November 25, 2013 Share Posted November 25, 2013 I really must stop clicking on these threads when I've only recently finished my lunch... Quote Link to comment Share on other sites More sharing options...
visog Posted November 25, 2013 Share Posted November 25, 2013 "What do you think?" A darned sight better than the normal single cut... But then the Dolphin is even nicer so what's the point? P.S. Nice Photoshops skills... Quote Link to comment Share on other sites More sharing options...
Roland Rock Posted November 25, 2013 Share Posted November 25, 2013 It would be much nicer if you rounded over that annoying point on the bottom of the bass Quote Link to comment Share on other sites More sharing options...
DiMarco Posted November 26, 2013 Author Share Posted November 26, 2013 Might look nice, but it is not a Dolphin anymore that way. Quote Link to comment Share on other sites More sharing options...
Dazed Posted November 26, 2013 Share Posted November 26, 2013 My opinion for what it's worth. If it ain't broke don't fix it. I don't see it as an improvement on the original. Quote Link to comment Share on other sites More sharing options...
Roland Rock Posted November 26, 2013 Share Posted November 26, 2013 [quote name='DiMarco' timestamp='1385478472' post='2288696'] Might look nice, but it is not a Dolphin anymore that way. [/quote] Bonus Quote Link to comment Share on other sites More sharing options...
sprocket123 Posted November 26, 2013 Share Posted November 26, 2013 Great work DiMarco , wonder what it would look like if you extend the upper bout to the 12 th fret . Quote Link to comment Share on other sites More sharing options...
TheGreek Posted November 27, 2013 Share Posted November 27, 2013 [quote name='Dazed' timestamp='1385486842' post='2288869'] My opinion for what it's worth. If it ain't broke don't fix it. I don't see it as an improvement on the original. [/quote] [size=6]Thank you!!![/size] Quote Link to comment Share on other sites More sharing options...
Sibob Posted November 27, 2013 Share Posted November 27, 2013 I like it! I prefer it to the original shape! Si Quote Link to comment Share on other sites More sharing options...
Dazed Posted November 27, 2013 Share Posted November 27, 2013 [quote name='TheGreek' timestamp='1385548745' post='2289470'] [size=6]Thank you!!![/size] [/quote] You're welcome❓😇 Quote Link to comment Share on other sites More sharing options...
DiMarco Posted November 27, 2013 Author Share Posted November 27, 2013 It is not intended to be an improvement, just a different model, kinda like with the Thumb nt and sc models. I'd like to try one if it were real and probably gas for one. Quote Link to comment Share on other sites More sharing options...
DiMarco Posted December 1, 2013 Author Share Posted December 1, 2013 Final two versions, with sweet Wengé & Zebrano and a slightly fatter body model. This is where I will stop. This is my dreambass. Quote Link to comment Share on other sites More sharing options...
eude Posted December 1, 2013 Share Posted December 1, 2013 I had Beavs Graphics, who used to do renderings for very little money do me a Dolphin Singlecut 6er a while back. What do you reckon? [attachment=149638:SCdolphintemp.png] Eude Quote Link to comment Share on other sites More sharing options...
DiMarco Posted December 1, 2013 Author Share Posted December 1, 2013 That looks a lot more chunky, less sleek so to speak. No pun intended. I wanted an elegant looking design so I chose to keep it curvy. Quote Link to comment Share on other sites More sharing options...
charic Posted December 1, 2013 Share Posted December 1, 2013 [quote name='eude' timestamp='1385930192' post='2293808'] I had Beavs Graphics, who used to do renderings for very little money do me a Dolphin Singlecut 6er a while back. What do you reckon? [attachment=149638:SCdolphintemp.png] Eude [/quote] I much prefer this one!!!! Quote Link to comment Share on other sites More sharing options...
eude Posted December 2, 2013 Share Posted December 2, 2013 [quote name='DiMarco' timestamp='1385932971' post='2293866'] That looks a lot more chunky, less sleek so to speak. No pun intended. I wanted an elegant looking design so I chose to keep it curvy. [/quote] Totally appreciate that, the whole singlecut things are marmite enough, before you even start looking at different designs... It will be a fair bit chunkier as it's based around a 6 string 32" bass. [quote name='charic' timestamp='1385933526' post='2293874'] I much prefer this one!!!! [/quote] Thanks dude. Quote Link to comment Share on other sites More sharing options...
charic Posted December 2, 2013 Share Posted December 2, 2013 [quote name='eude' timestamp='1385980102' post='2294185'] Thanks dude. [/quote] It reminds me of something, it may be one of the BC rich guitars... possibly the mockingbird Quote Link to comment Share on other sites More sharing options...
Sibob Posted December 4, 2013 Share Posted December 4, 2013 [quote name='DiMarco' timestamp='1385911683' post='2293488'] Final two versions, with sweet Wengé & Zebrano and a slightly fatter body model. This is where I will stop. This is my dreambass. [/quote] Very cool Warwick do have a custom-shop you know Si Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.