ShergoldSnickers Posted December 23, 2013 Share Posted December 23, 2013 (edited) Just started a replacement Hayman logo for a Hayman 4040 bass that Discreet has bought. The headstock is currently without a logo, and this should supply an unusual bespoke replacement. The first top disc, containing the roughly hand-cut Hayman 'H' is done. More careful filing and use of various emery grades next. The disc in these photos will be 25.5mm in diameter when finished. Edited December 23, 2013 by ShergoldSnickers Quote Link to comment Share on other sites More sharing options...
discreet Posted December 23, 2013 Share Posted December 23, 2013 Nice one Ian, very much looking forward to this! The original Hayman 'H' logo was a perspex insert and they are now as rare as hen's teeth. To give you some idea, this is what they looked like: A bit of background: The Hayman 4040 bass was built in London by Jack Golder and Norman Houlder of Shergold Woodcrafts Limited (established 1967). The Hayman brand name was applied to instruments distributed by Dallas Arbiter until termination of the contract in 1975. From 1975 to 1982 their guitars and basses appeared under their own Shergold brand. So now you know. Mine has been restored by The Bass Doc and I hope to have visual contact with it early in the new year. There will be pics. But not until Ian's top bit of silversmithing is in position. Quote Link to comment Share on other sites More sharing options...
ash Posted December 23, 2013 Share Posted December 23, 2013 This is fantastic, great piece of work, well done! Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted December 28, 2013 Share Posted December 28, 2013 [quote name='ShergoldSnickers' timestamp='1387813849' post='2316029']...The disc in these photos will be 25.5mm in diameter when finished.[/quote] So, nearly 1", then..? [quote name='discreet' timestamp='1387818283' post='2316083']...they are now as rare as hen's teeth...[/quote] ...and this one even more so..! Excellent 'customisation' here. Where's that 'Like' button, again..? Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted January 13, 2014 Author Share Posted January 13, 2014 Logo tightened up and ready for soldering to the 5mm silver ring that surrounds it. Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted January 18, 2014 Author Share Posted January 18, 2014 The 5mm ring, fashioned from a virtually straight piece of 'wire'. After some initial hand bending — wearing leather gauntlets* to protect the fingers and wrists from accidental slippage — the wire was shaped to size using a ring mandrel and hide mallet, interspersed with annealing the silver wire. By bending so that the ends overlapped coil-wise, a straight cut through both ends mean that the ends will butt properly when pushed together. The discolouration is caused by the annealing. Once soldered, and made perfectly circular, the ring will be filed flat on the side to be soldered to the logo. This will create the outer rounded bevel to the logo. * I'll take any excuse to wear leather gauntlets. Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted February 15, 2014 Author Share Posted February 15, 2014 The ring is now fully formed, soldered and in the process of filing, smoothing etc. This shows the flattened underside, that will be flush with the headstock. If you look very carefully you can see the silver solder join at about 10 o'clock. And roughly how the finished logo will look: Quote Link to comment Share on other sites More sharing options...
discreet Posted February 15, 2014 Share Posted February 15, 2014 Aaagggghhh! Just how I was hoping it would look, i.e. just like the original - only in silver. Superlative work my friend, really very well done indeed. Fantastic! Quote Link to comment Share on other sites More sharing options...
Maude Posted February 15, 2014 Share Posted February 15, 2014 That join is superb! I work with metal a lot and know how difficult it can be to get a join in a ring as tight as that. The logo as a whole looks fantastic . Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted February 16, 2014 Author Share Posted February 16, 2014 [quote name='Maude' timestamp='1392486373' post='2369351'] That join is superb! I work with metal a lot and know how difficult it can be to get a join in a ring as tight as that. The logo as a whole looks fantastic . [/quote] Yep, the first join cracked and failed when I put the ring on a stretcher (shown below) to get it perfectly circular. I had to cut the join and resolder it, but this time it was fine. Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted February 16, 2014 Share Posted February 16, 2014 [quote name='ShergoldSnickers' timestamp='1392568244' post='2370104']... a stretcher (shown below) ... [/quote] I don't want to see pictures of this device in operation; even less any alternative uses to which it may be put. Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted February 16, 2014 Author Share Posted February 16, 2014 [quote name='Dad3353' timestamp='1392569665' post='2370141'] I don't want to see pictures of this device in operation; even less any alternative uses to which it may be put. [/quote] I didn't wait in vain. I knew someone wouldn't be able to resist. Quote Link to comment Share on other sites More sharing options...
Thunderbird Posted February 16, 2014 Share Posted February 16, 2014 Awesome work Ian absolutely fantastic Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted February 23, 2014 Author Share Posted February 23, 2014 Getting closer... the outer ring has been filed to the correct 'D' section, and will be soldered to the base soon. Lots of polishing after that, and then we are there. And the hallmarks... sponsor's mark (me) purity mark (925 parts per 1000 silver), Yorkshire rose (Sheffield Assay Office), Sterling Silver lion, and the date mark 'p'. All laser cut. Quote Link to comment Share on other sites More sharing options...
Truckstop Posted February 23, 2014 Share Posted February 23, 2014 Very, very cool! Quote Link to comment Share on other sites More sharing options...
discreet Posted February 23, 2014 Share Posted February 23, 2014 Very close! Thanks for this Ian, it's looking really fantastic. Quote Link to comment Share on other sites More sharing options...
mxm Posted February 26, 2014 Share Posted February 26, 2014 Brilliant stuff ! Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted February 27, 2014 Author Share Posted February 27, 2014 [quote name='Truckstop' timestamp='1393167243' post='2376865'] Very, very cool! [/quote] [quote name='mxm' timestamp='1393443294' post='2380444'] Brilliant stuff ! [/quote] Thanks guys — I'm waiting for someone to order something that requires getting the big hammers and mallets out, with lots of noise and bending of metal over large anvils. Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted March 3, 2014 Author Share Posted March 3, 2014 Outer ring and logo disc now soldered together. The whole thing has taken on a temporary matt finish due to being 'pickled' in acid after the soldering process. This removes the borax residue. Prior to soldering, the work is brushed with a solution of borax both to act as a flux, and as a protective coating to the silver, to prevent the copper content oxidising and discolouring — fire stain. As the work has been previously part-polished, getting the sheen back will be easier. Quote Link to comment Share on other sites More sharing options...
discreet Posted March 3, 2014 Share Posted March 3, 2014 So much work and so many processes! This is going to be really great. Thanks for the update Ian! Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted March 8, 2014 Author Share Posted March 8, 2014 Essentially there now. The inner disc has been given a lightly hammered finish to contrast with the smooth polish of the outer ring. Quote Link to comment Share on other sites More sharing options...
Maude Posted March 8, 2014 Share Posted March 8, 2014 I like threads like this, you go down through all the pictures and it's like, 'that's good, and that's good' and it really is good, but then you scroll to the last picture and 'holy sh*t that looks good'. Love it . Quote Link to comment Share on other sites More sharing options...
ShergoldSnickers Posted March 8, 2014 Author Share Posted March 8, 2014 Thanks Maude. The photo above exaggerates the effect of the hammering, and whilst it's a little more subtle than that, it will get smoothed out and flattened a bit to tame it. Quote Link to comment Share on other sites More sharing options...
Dad3353 Posted March 8, 2014 Share Posted March 8, 2014 I'd be tempted to buy a Hayman simply for the prestige of having an insignia such as this made. A real jewel in the crown... Quote Link to comment Share on other sites More sharing options...
discreet Posted March 8, 2014 Share Posted March 8, 2014 [quote name='ShergoldSnickers' timestamp='1394296007' post='2390020'] Thanks Maude. The photo above exaggerates the effect of the hammering, and whilst it's a little more subtle than that, it will get smoothed out and flattened a bit to tame it. [/quote] Thanks very much for the update! Veritably quaking with expectation now! [quote name='Dad3353' timestamp='1394296565' post='2390026'] I'd be tempted to buy a Hayman simply for the prestige of having an insignia such as this made. A real jewel in the crown... [/quote] They are not common, but can be found... get one before the price goes up! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.