Jase Posted June 30, 2008 Posted June 30, 2008 (edited) I've decided That a spare amp is needed....so, got my eye on a Hartke LH500. All I want to do is cover the cost of the amp with it's delivery which is £270..ish give or take. Ok, wear and tear, the bass has only been used at home, I have used it quite a lot so I would say it needs a set up, and a board dressing, due to rounds being used. The bass is in good condition, apart from slight damage to paint work where the truss rod meets the body....see pic: No other significant marks or dings other than normal use. [attachment=10192:bass_008.jpg] The pick guard is not CIJ, it's from an ebay shop and is slightly short of the control plate, it hasn't been fitted and still has plastic covering: [attachment=10193:bass_001.jpg] There are also genuine Fender bridge and pick up covers, which also haven't been fitted. I also have a Fender thumb rest, not fitted but does come with a Jazz plate plan for fitting. The volume and tone knobs are from a USA Jazz, I'll put the original ones in too with some screws for the pick guard and covers. [attachment=10194:bass_005.jpg] As pics show the bass comes with a hardcase, also a Dimarzio cliplock strap, again not fitted, some washers for the vintage type pins. I think that's about it, looking for an offer around the price of the amp I need. Jase. [attachment=10195:bass_004.jpg] [attachment=10196:bass_006.jpg] [attachment=10197:bass_007.jpg] [attachment=10200:bass_003.jpg] Edited July 2, 2008 by Jase
Jase Posted July 1, 2008 Author Posted July 1, 2008 [quote name='Duarte' post='230323' date='Jul 1 2008, 09:53 AM']NICE[/quote] Thank you sir! On hold until the weekend
Jase Posted July 1, 2008 Author Posted July 1, 2008 [quote name='Rumble' post='230778' date='Jul 1 2008, 06:54 PM']Which body wood and pups does this have?[/quote] It's alder and US pups.
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts