How do I connect my cheap mixer to toneport ux1 interface .?

[RAY AGAINST THE MACHINE]

Toneport already connected via USB to Mac mini. Mixer is Behringer ub802. .
On the ux1 I have tried using the line inputs.. No good .
I was thinking of connecting the mixer to the input jack of the ux1 , where the guitar/bass goes.
There is also a Xlr/ mic input on the ux1.

Sorry for sounding stupid, but can somebody help please?

Cheers

[RockfordStone]

if memory serves, the toneports are direct input devices, so you have to plug the guitar/mic in directly

if you have line out outputs on the mixer try sending them through there, but i don't think these are designed for that

[RAY AGAINST THE MACHINE]

Thanks for that. The one I haven't tried yet is the phono jacks (tape in/out). The ones I have tried (all trs jacks) , stereo / aux return- fx send- curl room out- and main out .
It's probably something so basic( but so bloody annoying). I take it the studio monitors stay in the ux1 .

More help please ..

[lurksalot]

If you put a bass/ guitar through the ux1 , does your DAW 'see' it and can it record it ?

[RAY AGAINST THE MACHINE]

Yep. That's always been ok. What I'm trying to do is connect mixer to it.
Was thinking of connecting it to the guitar input jack of the ux1.

Help

Cheers

[lurksalot]

I guess if its an instrument input it probably needs to be in Mono , is it a mono 'out' from the desk that is aimed at it .

[RAY AGAINST THE MACHINE]

Thanks again lurksalot I tried something tonight. I used the phones jack from mixer into the input (where the bass goes) of the ux1.
It worked in podfarm . But what I did then, was close the podfarm application and used garageband. It worked! Sounds ok.
Will do for now.