Sibass11 Posted January 31, 2014 Share Posted January 31, 2014 (edited) Bought new from promenade music in 2011, Works perfectly, In excellent condition with a few small age related marks from being moved around. I can courier it to mainland UK for about £25 [color=#000000][font=Arial, Helvetica, sans-serif][size=3]The ABM 500 EVO III is a 575 watts RMS bass amp head designed to satisfy both bass-purists and tech-heads alike. Three straightforward rotary tone controls provide 20dB of cut and boost at 60Hz, 660Hz and 5kHz, and are supplemented by two pairs of additional sliders giving 15dB cut and boost at 180Hz, 340Hz, 1.3kHz and 2.6kHz. The EQ can be switched in/out by a footswitch, enabling players to go from a flat fretless sound to a boosted sound via a favourite EQ setting. A single input is switchable for passive and active instruments with a blend of solid state and dual triode tube preamps stages which can be preset and selected by footswitch, providing access to a massive range of clean, warm and overdriven tones.[/size][/font][/color] [color=#000000][font=Arial, Helvetica, sans-serif][size=3]Also footswitchable is the on-board compressor and the mighty Ashdown sub-harmonic generator which precisely tracks the main signal and reproduces it an octave lower. A sub-harmonic level control enables the player to add just the right amount of low-end reinforcement - everything from a subtle, thickening of the sound to unbridled, bone crushing tone. The ABM 500 EVO III features a front-panel mounted balanced DI out with pre or post EQ switching, a sub-bass output, a tuner output, an FX loop and a line input for the connection of an external sampler or sound source. Output muting cuts the signal from the DI output but leaves the tuner output 'live', allowing the player to tune up in silence. A new upgraded power section has faster transient attack, more headroom and even less noise.[/size][/font][/color] Edited March 14, 2014 by Sibass11 Link to comment Share on other sites More sharing options...
timmchale2009 Posted February 2, 2014 Share Posted February 2, 2014 Interested in any trades for this and the matching 2 x 10 cab?! Link to comment Share on other sites More sharing options...
Sibass11 Posted February 5, 2014 Author Share Posted February 5, 2014 Hi Timmchale 2009 , Sent you a PM Link to comment Share on other sites More sharing options...
Sibass11 Posted February 13, 2014 Author Share Posted February 13, 2014 Bump Link to comment Share on other sites More sharing options...
MB1 Posted February 20, 2014 Share Posted February 20, 2014 MB1. BUMP! Link to comment Share on other sites More sharing options...
Sibass11 Posted March 1, 2014 Author Share Posted March 1, 2014 Bump Link to comment Share on other sites More sharing options...
doctorbass Posted March 1, 2014 Share Posted March 1, 2014 PM'd Link to comment Share on other sites More sharing options...
leegibson12 Posted March 13, 2014 Share Posted March 13, 2014 PM'd Link to comment Share on other sites More sharing options...
Sibass11 Posted March 14, 2014 Author Share Posted March 14, 2014 Replied to thanks Link to comment Share on other sites More sharing options...
Recommended Posts