6v6 Posted March 12, 2014 Share Posted March 12, 2014 [quote name='LawrenceH' timestamp='1394577637' post='2393038'] I've found lightweight poplar fine with both butt and dado joints, glued and screwed, but it was essentially void free. Stuff with large voids in is problematic for finishing and I wouldn't trust it to behave structurally/sonically, I used some horrible far-eastern stuff for a prototype and it was a pain. [/quote] Interesting, thanks - the stuff I'm thinking of is the cheap far-eastern stuff which I've used (for non cab-building purposes) in the past. Maybe I'll try some poplar ply next time if I can find some. Quote Link to comment Share on other sites More sharing options...
discreet Posted March 12, 2014 Share Posted March 12, 2014 (edited) [quote name='richrips' timestamp='1394536973' post='2392310'] ...very low density foam cores, a higher density foam outer, then glass/epoxy skin with carbon where you really want stiffness. [/quote] There's a thread on Talkbass somewhere about a guy who made a Jack from composite materials... I'll try and find it. Meanwhile, here's a twin 3012HO build... [url="http://www.talkbass.com/forum/f15/kappalite-3012ho-twin-2-way-build-fixed-977570/"]http://www.talkbass....d-fixed-977570/[/url] Edited March 12, 2014 by discreet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.