adamlunt Posted February 28, 2014 Share Posted February 28, 2014 If I was to make a DIY fuzz pedal using veroboard/stripboard would I be able to allocate an unused strip on the circuitboard as a point to which all ground connections can be wired, or would I have to use a chassis ground? Thanks, and I hope I've posted this in the right place Quote Link to comment Share on other sites More sharing options...
rmorris Posted February 28, 2014 Share Posted February 28, 2014 (edited) [sup][font=arial, helvetica, sans-serif][size=4]In general you can take all the 'Grounds' to a strip on the stripboard then connect that strip to the chassis (assuming it's metallic of course) by a wire or braid.[/size][/font][/sup] Edited February 28, 2014 by rmorris Quote Link to comment Share on other sites More sharing options...
icastle Posted February 28, 2014 Share Posted February 28, 2014 It would depend on the circuit, but you'll quite often find that the negative rail is generally connected to earth anyway. If that's the case with your circuit then there's no need to make a separate one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.