sblueplanet Posted March 9, 2014 Share Posted March 9, 2014 Can anyone tell me what type of terminal blocks can be used to join my jazz bass pickups to the control plate so I can remove everything for a refin and not have to try soldering afterwards? Also fancy trying a stack-knob setup in future so would be good to be able to switch between hassle-free. Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted March 9, 2014 Share Posted March 9, 2014 any chocolate block type will work.... but you'll still need to solder wires to the pots to end at the joining block... and by the time you've done that you'd may have well learn to solder. Quote Link to comment Share on other sites More sharing options...
lemmywinks Posted March 11, 2014 Share Posted March 11, 2014 For a neater solution you could use the little PCB screw terminals, solder the wires to the base pin and then shrink tube it. Quote Link to comment Share on other sites More sharing options...
icastle Posted March 11, 2014 Share Posted March 11, 2014 So... you need to solder on a solderless connection to avoid the need to learn how to solder. Quote Link to comment Share on other sites More sharing options...
Grangur Posted March 11, 2014 Share Posted March 11, 2014 (edited) Isn't this more what the OP is looking for: http://www.musiciansfriend.com/accessories/seymour-duncan-liberator-solderless-potentiometer-500k The problem is you will probably need more space in in the body cavity to fit the things in. The best route is this one: http://www.youtube.com/watch?v=xrVCkEoY_8M Edited March 24, 2014 by icastle Link fixed. Quote Link to comment Share on other sites More sharing options...
lemmywinks Posted March 11, 2014 Share Posted March 11, 2014 [quote name='icastle' timestamp='1394563415' post='2392800'] So... you need to solder on a solderless connection to avoid the need to learn how to solder. [/quote] You know what I mean! I thought the OP just wanted less hassle when wiring pickups in, dunno if he can solder or not.I've thought of the standard screw terminals before but they're pretty big and control cavities can be pretty tight. Don't know if you can get small terminals with screw connections at both ends, would be handy. Quote Link to comment Share on other sites More sharing options...
sblueplanet Posted March 11, 2014 Author Share Posted March 11, 2014 I've seen it done elsewhere on here but can't remember the topic. I just wonder if the wiring blocks have to be of a certain amp or something? Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted March 11, 2014 Share Posted March 11, 2014 No, there is next to no power in a pickup Quote Link to comment Share on other sites More sharing options...
KiOgon Posted March 11, 2014 Share Posted March 11, 2014 [quote name='sblueplanet' timestamp='1394569098' post='2392904'] I've seen it done elsewhere on here but can't remember the topic. I just wonder if the wiring blocks have to be of a certain amp or something? [/quote] I make wiring kits with solderless connectors, I could fit them to your controls for you if you want to send it down & cover return postage PM me if I can help. Cheerz, John Quote Link to comment Share on other sites More sharing options...
lemmywinks Posted March 11, 2014 Share Posted March 11, 2014 Could I ask what sort of connectors you use? Provided it isn't a secret of course! Quote Link to comment Share on other sites More sharing options...
sblueplanet Posted March 14, 2014 Author Share Posted March 14, 2014 Why oh why!!!!!!! Cut the wires to fit the terminals, fine. Bare wires, not so fine. Bridge pup ground wire snaps off pot at solder. Attempt to connect remaining wires into terminals and re-position control plate, disaster. Half the wires come loose and control plate won't fit back into cavity! Bass will in pieces for a while as I plan to sand and prep it for a respray but at some point it's going to need sorted. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.