Jump to content
Why become a member? ×

Angled speaker cabs?


andrewrx7
 Share

Recommended Posts

Apologies if this is a daft question to start off with, but why don't manufacturers make cabs with angled speakers to get a more even distribution of sound? I've only ever seen a couple of angled speaker cabs (and to be honest can't remember who made them or whether they were for bass or guitar), but why isn't this really the norm? It is blatently obvious that even moving a few feet from the centre line in front of a cab (bass or guitar) the audible response is significantly different. Would not having several speakers slightly angled provide a more even sound to an audience? This is made in reference to say, small venues, like pubs/clubs, without a FOH PA system. Just curoius...and willing to learn why this is not a good idea! :D

Link to comment
Share on other sites

[quote name='andrewrx7' timestamp='1394528295' post='2392142']
Would not having several speakers slightly angled provide a more even sound to an audience?
[/quote]It won't. This explains why. It's about PA, but the physics is the same:
http://www.gtaust.com/filter/05/07.shtml

The number one enemy of good horizontal dispersion is horizontally placed drivers. The number one reason why drivers are placed horizontally is 'that's how we've always done it'.

Link to comment
Share on other sites

[quote name='andrewrx7' timestamp='1394540612' post='2392387']
Crikey, my lunch break isn't long enough to read all that link! Thanks for that, I'll see how much of it I understand!
[/quote]Scroll down to [i]What if We Try a Different Type of Horizontal Array?[/i] to get to the meat of it.
[quote]Sunn Beta guitar combo had cross-firing speakers[/quote]Cross-firing works. It's never been successful in the marketplace because 'it looks funny'. With bass cabs cross-firing reduces the internal volume of the cab, and that reduces bass response and output. Bass also has far less issues with beaming than guitar, so cross-firing isn't as beneficial as with guitar.

Link to comment
Share on other sites

[quote name='Musky' timestamp='1394583704' post='2393116']
Trace did a 3x12 guitar cab with the speakers all angled in different directions. Needless to say it never caught on.

[/quote]It was doomed because it didn't come from the usual cookie cutter mold. Trouble is, if you only try cookies from the usual mold you might never taste biscotti.

Link to comment
Share on other sites

To be fair it is also a nonsense as a design. Given that the distances between the speakers radiating surfaces is in the 10-70cm range and the angles less than 30[size=4] degrees, where off axis response is only going to be a few dB down it will pretty much have all the comb filtering problems of a 4x12 over the midrange. Only very high frequencies (high for a bass anyway) are likely to be directed towards the bassists ears. [/size]

Link to comment
Share on other sites

OK, so the theory describes best sound dispersion using a vertically stacked array. I've tried a quick test with my gear with a 4x1 stack vs a 2x2 stack and yes, I can clearly hear differences. Quite surprised actually.

Question: fine to hear differences in a quiet room, with only the bass thumping away, but does this linear array set up all go wrong when you add guitar amps into the mix? Do you end up with the comb filtering effect again?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...