Genz Benz streamliner 900 - 2u rack ears?

[Freddie75]

Hi guys,

I'm struggling to get some rack ears for my genz amp.

Anyone know anywhere that sells them or is there anywhere that can make up?

Cheers
Freddie

[pockethammer]

I bought a flat 2u blank plate from flight case warehouse. Cut it in half bent each half in the right place drilled holes to suit amp (in my case a shuttle 9.2) job done.

Edited March 19, 2014 by pockethammer

[pockethammer]

Here's a pic

[Graham]

They make a kit, but it's an odd design as I recall and not the same as just fitting ears.

[ratman]

The rack kit for the Streamliner isn't just ears. It's one piece, bent 90deg, with the front panel and a bottom panel. To secure the amp to the bottom panel you unscrew the rubber feet from the amp and use just those screws to attach it to the base. It's also stupidly expensive. A bit of a rip off. I was lucky and got a used one.[attachment=158097:stl rack kit.jpg]

[bertbass]

You could do the same thing with one of these. http://www.ebay.co.uk/itm/NEW-UNI-II-RACK-SHELF-19-2U-DEEP-350-BLACK-/271405974739

[dmccombe7]

Have you tried Mark at Bass Direct. ?
I used the flat 19" rack tray for mine when I had the 600 streamliner.
Dave