Jump to content
Why become a member? ×
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt

Recommended Posts

Posted (edited)

Got this from work a while ago, as they were having a clear-out. Not sure what this was originally used for, probably a rack-mounted computer.

Was thinking I'd use it but it's a bit too big so has lingered in storage once again. Not sure what it's made of, feels like a very tough, hard plastic. Has edge and corner protector and has a sprung handle on both sides. Also has two skid rails on the bottom. Some light scratches but no deep scratches, cracks or dents.

As you can see from the pictures, it has foam blocks stuck to the inside for cushioning but if these are not right, I'm sure they can be replaced with more fitting ones.

External dimensions:
H: 31.5 cm
W 67.5 cm
D: 62.5

Internal dimensions will be about 0.5 to 1 cm less than the external ones.

I would guess the weight is about 10-12Kg but can weigh it you really need to know.

Would rather it was collected, as it's quite bulky. Can meet around the north M25 area for fuel money or around Essex, where I gig.

If I have no luck with this, I'll consider couriers.

Not after any trades, except for maybe a really good drive pedal.

EDIT: maybe trade for a decent bass hard-case.

[attachment=158208:IMG_20140314_173138.jpg]

[attachment=158209:IMG_20140314_173214.jpg]

[attachment=158210:IMG_20140314_173221.jpg]

[attachment=158211:IMG_20140314_173244.jpg]

[attachment=158212:IMG_20140314_173257.jpg]

Edited by Sharkfinger
Posted

Forgot to mention that the lid is hinged at one side with straps that only allow it to open at slightly more than 90 degrees to keep it open.

Feel free to make offers.

Oh and bump.

  • 2 weeks later...
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...