NancyJohnson Posted March 30, 2014 Posted March 30, 2014 I've come to the conclusion recently that my existing amp (Ashdown ABM EVOIII) isn't giving me enough volume when up against a maniacal drummer and a very loud guitarist, plus I have a festival date upcoming, so I'm tooling up to just go the power amp route (with a Sansamp RBI working as the preamp). After a bit of investigation, I'm now erring towards the amp in the subject title. Primarily it should give me adequate headroom, plus they weight so little, it'll save my back long term. Is suppose first up, has anyone any experience of the IPR range? Issues? Anything I should be aware of? Secondly, even after 30+ years of playing, I still don't fully understand the nitty gritty about ohms/impedance. I will be running two Hartke Hydrive cabinets (4x10/1x15) which are both 8 ohms. The amp is two channel...do I connect one cab to each output? Daisychain the cabinets out of one channel. Help! P Quote
terocious Posted March 31, 2014 Posted March 31, 2014 I have a first generation IPR1600 driven by RBI and it works great. I love the sound it produces. I used to have Hartke XL410 + XL115 cabs, but sold them and bought two TKS 112 instead. Quote
terocious Posted March 31, 2014 Posted March 31, 2014 Forget to mentioned that I have connected one cab to each output. Cabs are 8 Ohm each. RBI is connected to channel A and shared to channel B via jumper cable. Quote
Phil Starr Posted March 31, 2014 Posted March 31, 2014 I also have the IPR1600, I bought a second so I must have been happy. One speaker per channel is best there's even a built in crossover to a sub built in so you could try that as an experiment although probably not an important option. Reliable and absurdly light. Even with the IPR 1600 you might end up driving the 1x15 too hard so listen out for any unusual noises and turn down. How powerful is your ABM? You really ought to be able to out-muscle any drummer with those two cabs. The PA amp will give you a much cleaner sound though. If the festival is open air you'll still need PA support. Quote
NancyJohnson Posted March 31, 2014 Author Posted March 31, 2014 It's an ABM 500 and I'm running the RBI into the effects return - I found that routing it into the front jack didn't work so well for me, so I'm just using the power amp side of the Ashdown. I'm not a fan of just ramping everything up to ten - when gigging, the ABM runs at about 70% and I take a direct feed off the RBI via XLR into the PA. I'll keep both - the Ashdown is a very sensible refined amp, but I just need more dirt, which is where the RBI comes in..will probably just have home and away rigs! Quote
NancyJohnson Posted March 31, 2014 Author Posted March 31, 2014 Got an email from Peavey. IPR2 range drops in the UK end of May. I think that's where my swag will be going. P Quote
.jpg.518c69c2d9e1581799f3c11301dc2da5.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.