Captain Codpiece Posted April 1, 2014 Share Posted April 1, 2014 (edited) ok, i have a jag bass, and i ripped the guts out due to crappy stock pre. well i would love a glokenklang or a delano pre, but funds simply don't allow for it i have tried an artec in the past... and the only issue i had with it was the helpful battery low indicator (the pre squealed like a synth if you adjusted the pots if the battery was low... interesting and fun.... if annoying) well i have seen the artec SE3p, 3 band with sweepable mids on two stack pots.... handy for the jag bass.... as i can pop those and the circuit in the normal control plate part.... but i don't want a blend and ideally would like to keep the active passive option also... but as the schematic below shows the Vol is on the board. with some digging i have found the vol to be a standard 500k so passive 'should' be possible........ so the big Q is anyone good with electronics know if i could run a tone from the vol or manage to bypass it? Edited April 1, 2014 by Captain Codpiece Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.