bakerster135 Posted April 2, 2014 Share Posted April 2, 2014 (edited) So after much saving I'm now in the market for a nice Pre-EB Stingray. I have two particular ones that I'm looking at, going for a similar price, but I'm just not sure what to go for! The first is a 1979, has had a good refret at some point but all original aside from that. 3-bolt neck and through-body stringing, but a bit beat up condition-wise! The other is a 1983, made in January and happens to be my year of birth bass! :-) This is all original aside from a brass nut, and in slightly better condition! This one has the 4-bolt neck and top-loading bridge. If you were looking, which would you be more interested in!?... Edited April 2, 2014 by bakerster135 Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted April 2, 2014 Share Posted April 2, 2014 If it's for playing lots - whichever feels and sounds the best. If you're a collector and want a museum piece... probably the 1975? Quote Link to comment Share on other sites More sharing options...
risingson Posted April 2, 2014 Share Posted April 2, 2014 I really like the late 70's Mocha finishes, maple board. Played on in this config in NYC last year, best Ray I think I've tried. You might want to speak to Andy Baxter, he deals in vintage Fender/Musicman etc. and is usually well stocked, if he doesn't have what you want in then you can ask him to hunt it down. Pricey I guess but worth checking out anyway http://www.andybaxterbass.com/guitars.php?pc=1&cat=6 Quote Link to comment Share on other sites More sharing options...
Ktmman Posted April 9, 2014 Share Posted April 9, 2014 I have read a similar post to this on a US forum and many posters seemed to be saying avoid the 3 bolt .. But don let me put you off, go with what ticks your boxes -) Quote Link to comment Share on other sites More sharing options...
Highfox Posted April 9, 2014 Share Posted April 9, 2014 Hard choice lol. Will add I have an 82 toploader and it's great Enjoy the search. Quote Link to comment Share on other sites More sharing options...
bakerster135 Posted April 9, 2014 Author Share Posted April 9, 2014 Thanks for the input guys! I've now played the 83, and it is jaw-droppingly good...Sounds a million times better than any EB stingray I've played. I'll be picking it up next week, good times! (If you get the geeky Stingray player reference there, shame on you! ) Quote Link to comment Share on other sites More sharing options...
Kiwi Posted April 9, 2014 Share Posted April 9, 2014 I guess I'm too late! If the sound is the same between both, and you plan to gig the instrument as a main bass, get the '83 if the neck is straight (there were QC issues around that time due to restricted supply of parts and CLF not putting truss rods in some necks - not Musicman's finest hour). If you just want it for occasional playing then get the '79. Quote Link to comment Share on other sites More sharing options...
The fasting showman Posted April 9, 2014 Share Posted April 9, 2014 I'm no authority, with my 2007 3 eq Stingray (sounds great to me), but I would have thought that the '83 one would have been made after all of the truss rod problems. Wasn't all the woodworking done under licence by Charvel at this point, due to said problems with CLF? It would be the '83 for me, I think you chose well. Quote Link to comment Share on other sites More sharing options...
Ktmman Posted April 9, 2014 Share Posted April 9, 2014 (edited) Bakerster135 Posted Today, 11:19 AM Quote"Thanks for the input guys! I've now played the 83, and it is jaw-droppingly good...Sounds a million times better than any EB stingray I've played. I'll be picking it up next week, good times! (If you get the geeky Stingray player reference there, shame on you! ) " yowser yowser yowser !!!!!! Edited April 9, 2014 by Ktmman Quote Link to comment Share on other sites More sharing options...
Highfox Posted April 9, 2014 Share Posted April 9, 2014 [quote name='The fasting showman' timestamp='1397045911' post='2420034'] I'm no authority, with my 2007 3 eq Stingray (sounds great to me), but I would have thought that the '83 one would have been made after all of the truss rod problems. Wasn't all the woodworking done under licence by Charvel at this point, due to said problems with CLF? It would be the '83 for me, I think you chose well. [/quote] From my understanding, all those necks were either fixed thrown away or replaced.. be a bit rare and unlucky to get landed with one of those nowadays I'd imagine. Might even be worth more to some collectors Quote Link to comment Share on other sites More sharing options...
bakerster135 Posted April 9, 2014 Author Share Posted April 9, 2014 (edited) [quote name='Highfox' timestamp='1397046261' post='2420043'] From my understanding, all those necks were either fixed thrown away or replaced.. be a bit rare and unlucky to get landed with one of those nowadays I'd imagine. Might even be worth more to some collectors [/quote] Yeah, apparently Leo Fender provided a load of completely straight (i.e. non-adjustable) truss rods, in a malicious move! Unbelievable...If that was the case with the one I'm getting, I'd certainly hope that would have been noticed by now! I'm going to be using this for drop C with 55-110s primarily as well, wasn't completely sure that the '79 three-bolt neck would handle that too well!?...Happy to be corrected of course! [quote name='Ktmman' timestamp='1397046213' post='2420039'] yowser yowser yowser !!!!!! [/quote] That's the one! Edited April 9, 2014 by bakerster135 Quote Link to comment Share on other sites More sharing options...
Dingus Posted April 9, 2014 Share Posted April 9, 2014 (edited) [quote name='bakerster135' timestamp='1397048092' post='2420085'] Yeah, apparently Leo Fender provided a load of completely straight (i.e. non-adjustable) truss rods, in a malicious move! Unbelievable...If that was the case with the one I'm getting, I'd certainly hope that would have been noticed by now! I'm going to be using this for drop C with 55-110s primarily as well, wasn't completely sure that the '79 three-bolt neck would handle that too well!?...Happy to be corrected of course! That's the one! [/quote] I used to own an 82/83 for bolt 'Ray and it was lightweight compared to most vintage Stingrays, and it sounded just how a Stingray should, very scooped in the mids,, massive bottom end and a slicing treble if you dialed it in with the preamp. However, a word of caution about the necks and using drop tuning . I take no pleasure whatsoever in raining on anyone's parade, but the combination of a very slim profile and pretty basic, un-laminated flat-sawn construction means that the old Music Man necks are not necessarily the most stable or robust , and can be rather prone to bending . I would be very reluctant to do anything that would put undue or unusual tension on the neck of a rare and valuable vintage bass like your incoming Stingray. You could potentially be letting yourself in for all kinds of problems, even with a four bolt fixing . Regardless of how it is bolted to the body, the neck is under the same stresses from string tension. Obviously, it's your bass so you can do just as you please, but just be aware that even with a correctly functioning truss rod, those necks need to be treated with a bit of care and respect to stay straight and true. That said, I hope your new bass is all you expect it to be and more. Edited April 9, 2014 by Dingus Quote Link to comment Share on other sites More sharing options...
bakerster135 Posted April 9, 2014 Author Share Posted April 9, 2014 [quote name='Dingus' timestamp='1397051961' post='2420145'] However, a word of caution about the necks and using drop tuning . I take no pleasure whatsoever in raining on anyone's parade, but the combination of a very slim profile and pretty basic, un-laminated flat-sawn construction means that the old Music Man necks are not necessarily the most stable or robust , and can be rather prone to bending . I would be very reluctant to do anything that would put undue or unusual tension on the neck of a rare and valuable vintage bass like your incoming Stingray. You could potentially be letting yourself in for all kinds of problems, even with a four bolt fixing . Regardless of how it is bolted to the body, the neck is under the same stresses from string tension. Obviously, it's your bass so you can do just as you please, but just be aware that even with a correctly functioning truss rod, those necks need to be treated with a bit of care and respect to stay straight and true. [/quote] Aye yai yai! Well thanks for letting me know Dingus Unfortunately my other two basses are Jazz-style, so I might be a bit stuck on that front! I'll just have to try it I guess...Thanks for all the advice as usual everyone! Quote Link to comment Share on other sites More sharing options...
Bigwan Posted April 9, 2014 Share Posted April 9, 2014 Surely it must be possible to source string sets with tensions that match standard tuning while holding the tuning you require? Doesn't Circle K do this sort of thing? Quote Link to comment Share on other sites More sharing options...
bakerster135 Posted April 9, 2014 Author Share Posted April 9, 2014 (edited) [quote name='Bigwan' timestamp='1397055411' post='2420206'] Surely it must be possible to source string sets with tensions that match standard tuning while holding the tuning you require? Doesn't Circle K do this sort of thing? [/quote] Well, I was thinking that as I'm mainly going to be in CGCF, the heavier gauge string would effectively provide around the same tension as 45-105s in standard (EADG) tuning anyway? Am I wrong in thinking this? Maybe 50-110 may be more appropriate?... Probably need to start a whole new discussion about this really! Edited April 9, 2014 by bakerster135 Quote Link to comment Share on other sites More sharing options...
bakerster135 Posted April 9, 2014 Author Share Posted April 9, 2014 P.s. Just to avoid any confusion from earlier comments, we're not playing any Chic in drop-C tuning! Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.