Jump to content
Why become a member? ×
Proof of ownership - please read

SOLD!: Fender American Deluxe Jazz Bass V (Natural, Maple) 2010 model
£1400

Wooks79

By Wooks79,
in Basses For Sale

 Share

Recommended Posts

Wooks79 Community Regular

Wooks79

Posted
Posted (edited)

SOLD!

I haven't really had a use for my 5 string since the last band ended back in July 2012, so as there are other things on my radar, I am gonna put this up there for sale.

I was never a massive fan of 5 strings as I had never found a string spacing that I got on with until this one. Its in absolutely top condition and has been very well taken care of. I would think anyone would be pushed to find any marks on this at all.

Feel free to PM with trade offers, but I warn you ahead of time, theres probably not many things would peak my interest at the mo. Worth a try though!

Things that might tempt me - think valve amps, nice P Basses, stuff with maple boards... give it a go.

If you wanna swap for a Gibson RD Artist, then you've probably got a deal, as thats one of the things I'm aiming to raise funds for if possible.





Complete with hard case, all the case gubbins that it comes with, and 2 extra sets of strings.

If you play this, you will fall in love with it! All the Fender facts, figures and sales stuff can be read here -

[url="http://www.fender.com/series/american-deluxe/american-deluxe-jazz-bass-v-five-string-ash-maple-fingerboard-natural-3-ply-bwb-pickguard/"]http://www.fender.co...-bwb-pickguard/[/url]

[url="http://www.gak.co.uk/en/fender-american-deluxe-jazz-bass-v-new-2010-model-natural-maple/31385"]http://www.gak.co.uk...ral-maple/31385[/url]

...it says -[list]
[*][size=4]Urethane Finish[/size]
[*][size=4]Neck: Maple, Modern C Shape, (Tinted Gloss Urethane Finish)[/size]
[*][size=4]Fingerboard: Bound, 9.5 Radius (241 mm)[/size]
[*][size=4]No. of Frets: 21 Medium Jumbo Frets[/size]
[*][size=4]Pickups: 2 N3 Noiseless Jazz Bass Pickups[/size]
[*][size=4]Controls: Master Volume, Pan Pot, 3-Band Active EQ[/size]
[*][size=4]Treble Boost/Cut: +/- 10 db @ 8kHz, a shift in the cut frequency, and about a 2dB slope per octave[/size]
[*][size=4]Mid Boost/Cut: +10dB, -15dB @ 500Hz, and a wide band slope[/size]
[*][size=4]Bass Boost/Cut: +/- 12 db @ 40 Hz, with a 4dB slope per octave[/size]
[*][size=4]Active/Passive Mini-Toggle Switch[/size]
[*][size=4]Pickup Switching: Pickup Pan Control[/size]
[*][size=4]Bridge: HMV, High Mass Vintage, (Strings-Thru-Body or Topload)[/size]
[*][size=4]Machine Heads: Fender Light-Weight Vintage Style Tuners with Tapered Shafts[/size]
[*][size=4]Hardware: Chrome[/size]
[*][size=4]Pickguard: 3-Ply Black/White/Black[/size]
[*][size=4]Scale Length: 34 (863.6 mm)[/size]
[*][size=4]Width at Nut: 1.625 (41.3 mm)[/size]
[*][size=4]Improved Electronics Resulting in Increased Headroom and Tighter Low-End Response[/size]
[*][size=4]18-Volt Power Supply[/size]
[*][size=4]Active/Passive Mini-Toggle Switch[/size]
[*][size=4]Passive Tone Control for Passive Mode[/size]
[*][size=4]Stealth A String Retainer[/size]
[*][size=4]Tinted Neck[/size]
[*][size=4]Posiflex Graphite Neck Support Rods[/size]
[*][size=4]5-Bolt Neck Plate[/size]
[*][size=4]Contoured Heel for Easier Access to Upper Frets[/size]
[*][size=4]Rolled Fingerboard Edges[/size]
[*][size=4]Highly Detailed Nut and Fret Work[/size]
[*][size=4]Genuine Bone Nut[/size]
[*][size=4]Wide-Slot Flat Head Screws on Battery Compartment (for Easy Changes with a Coin or Pick)[/size]
[*][size=4]Pearloid Block Position Inlays[/size]
[*][size=4]Neck Binding[/size]
[*][size=4]70s Style Logo[/size]
[*][size=4]Strings: Fender USA NPS, Gauges: .045, .065, .085, .105[/size]
[/list]
Thanks for reading!

Edited by Wooks79
Link to comment
Share on other sites
  • 3 weeks later...
Wooks79 Community Regular

Wooks79

Posted
  • Author
Posted

[quote name='hiram.k.hackenbacker' timestamp='1398872348' post='2438519']
Historically I've never been attracted to a natural finish, but that, with binding, blocks and maple looks mighty fine indeed.
I would be very tempted to have a looksee if you were a bit closer as I'm considering a backup 5'er.
Middlesbrough ain't round the corner unfortunately :-(
[/quote]

Lets get a gig swap sorted, I will bring the bass along ;)

Link to comment
Share on other sites
  • 3 months later...
  • 1 month later...
  • 1 month later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...