billynoband Posted July 17, 2008 Share Posted July 17, 2008 (edited) DIY Bill Fitzmaurice Tuba 24 bass cab for sale fitted with a new Eminence Beta 10" speaker 250watts at 8ohn. Its made from a mixture of mdf and ply and is finished in matt black paint, ungigged but dusty, it has clamp speaker terminals but could be changed easily no speaker corners fitted yet. size 24" square 45ibs weight. £75. The photo on the left is the internals of this cab minus speaker. ALSO , empty Bill Fitzmaurice DR 250 bass cab £30 which needs a lot of filling and painting but worked well when I tested the abouve Beta 10 in it. It is voiced for bass guitar only with no tweeters fitted . Size 20" x 22" weight -- a lot. This is made from a variety of wood/scrap wood and I built this in the easter holidays to pass the time/keep hands busy when my teenagers were out, I never thought I would build it all but I did. If you put a beta 10 in it (£40) and finished the outside with filler/paint and fitted speaker terminals you would have a great set up as the two would compliment each other. I am selling because I am switching to the smaller Omni 10.5 because my back goes even when I put the milk back in the fridge. Some people say you cannot build decent bass cabs but this is rubbish spread by makers of expensive MDF/ply boxes with cheap 15" speakers in them. Photos of both [url="http://www.finnbass.com/showthread.php?t=688"]http://www.finnbass.com/showthread.php?t=688[/url] page 2. Bottom photos T24 top ones of DR250. The BFM DIY speaker site [url="http://www.billfitzmaurice.com"]http://www.billfitzmaurice.com[/url] PICK UP FROM KETTERING , NORTHANTS ONLY CHEERS. Or you could send your retired dad to get them. Edited August 16, 2008 by billynoband Link to comment Share on other sites More sharing options...
lowhand_mike Posted July 18, 2008 Share Posted July 18, 2008 contacting the band to see if its what they are after, they have been talking about getting a sub to reinforce the PA and i think the tuba would do just that, and i could use the DR250 as an extension cab. if they want it i'll get back to you Link to comment Share on other sites More sharing options...
billynoband Posted July 19, 2008 Author Share Posted July 19, 2008 If someone wants these I could meet them on the A14, M1, M6 possibly as long as I dont have to go over 25 miles ish. Link to comment Share on other sites More sharing options...
billynoband Posted July 30, 2008 Author Share Posted July 30, 2008 (edited) One and only bump. Thanks. k Edited August 4, 2008 by billynoband Link to comment Share on other sites More sharing options...
billynoband Posted August 4, 2008 Author Share Posted August 4, 2008 (edited) OK, one more, sorry. Last I promise. Revised bump Edited August 16, 2008 by billynoband Link to comment Share on other sites More sharing options...
billynoband Posted August 16, 2008 Author Share Posted August 16, 2008 Revised price bump Link to comment Share on other sites More sharing options...
Recommended Posts