cclowend Posted May 23, 2014 Share Posted May 23, 2014 So I installed some barts on my MIM jazz. It sounds rubbish. The sound is a bassless honky noise with very low output. I am running pots of a 250 value and I am wondering if I should change the resistor on the tone control. Its wired up properly. The only difference is that the bridge pup is earthed directly to the bridge pot instead of going to the earth under the bridge pup (screw in the wood) and then off that to the bridge pot. HEEEEEELLLLLP!!!! Quote Link to comment Share on other sites More sharing options...
KiOgon Posted May 23, 2014 Share Posted May 23, 2014 A picture is worth a thousand words - can you put up a picture of your pots, wiring etc? Have you tried swapping polarity on one pick up? Quote Link to comment Share on other sites More sharing options...
Conan Posted May 23, 2014 Share Posted May 23, 2014 [quote name='cclowend' timestamp='1400831806' post='2457289'] So I installed some barts on my MIM jazz. It sounds rubbish.[/quote] See - you should have gone for the EMGs after all.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.