whynot Posted May 23, 2014 Share Posted May 23, 2014 (edited) My nearly new Bonafide is back up for sale as I've picked up a Puma 500, which makes more sense for me as I don't need all these options and the Puma slips in my gigbag. Amp comes with Footswitch (and lead), Rack Ears, original box and manual. First pic was taken on a gig 2 weeks back, second of never used FS in garage and third stock photo showing connection options. Here is a link to the Tecamp site... [url="http://www.tecamp.biz/en/products/amlification/6-bonafide.html#overview"]http://www.tecamp.bi...e.html#overview[/url] I had a few questions about this previously mostly relating to connecting 2 instruments. As this is 2 separate amps in one unit, you can have 2 instruments connected at once with different eq's and jump between each amp via the footswitch or front panel. You can drive separate cabs from each channel or bridge down to 900 watts. I've only gigged using one 4 ohm cab out of one channel so far and it's a loud beast. UK only sale. Thanks for looking.[list] [*]two separate bass amps in one housing [*]any possible routing [*]ultra compact [*]»Taste«-Filter, 4-Band EQ, »Line Out« per channel [*]separate effects loops [*]channel shared »DI out« post [*]»Mute« and »Channel« footswitch included [*]»Channel B« with 200 Hz »Lo Pass« Filter and +12 dB »Sub-Boost« [*]»Bridged Mode« and »Mono«Switch [*]900 w power at 4 ohms, 2 x 450 w power at 2 ohms [*]only 2,2 kg; 4.85 lbs [/list] Edited May 25, 2014 by whynot Link to comment Share on other sites More sharing options...
whynot Posted May 25, 2014 Author Share Posted May 25, 2014 Sunday Bump Link to comment Share on other sites More sharing options...
Recommended Posts