cd_david Posted July 18, 2008 Share Posted July 18, 2008 (edited) Hello Feeler at the minute PR-810H Dual Bass Cabinet for sale but i would ideally prefer a swap for an ampeg 610. This is the BIG ampeg 2400 watt peak cab, see spec sheet attachment. Havent thought of price yet? Selling due to new estate car not as big as the last one, bugger should take tape measure when i buy a new car! Edited July 18, 2008 by cd_david Link to comment Share on other sites More sharing options...
Dubs Posted July 18, 2008 Share Posted July 18, 2008 Beasty! - never seen one of these before Link to comment Share on other sites More sharing options...
cd_david Posted July 18, 2008 Author Share Posted July 18, 2008 It certainly is a Beasty! VERY LOUD and clean but also quite heavy, i wouldnt get rid if it wasnt so difficult to get out of the new estate car Link to comment Share on other sites More sharing options...
ben604 Posted July 18, 2008 Share Posted July 18, 2008 Oh my..! Link to comment Share on other sites More sharing options...
steve-soar Posted July 18, 2008 Share Posted July 18, 2008 (edited) Is that an MC2 power amp? Gulp! That'll make you nads tingle. Edited July 18, 2008 by steve-soar Link to comment Share on other sites More sharing options...
Raslee Posted July 19, 2008 Share Posted July 19, 2008 How much you looking for? Is there anyway this can be wired to create 8 ohms (My old Eden head min load for 800watts is 8 ohms, doesn't take 4)....am after an 8 ohm 8x10 my email [email protected] cheers Link to comment Share on other sites More sharing options...
cd_david Posted July 19, 2008 Author Share Posted July 19, 2008 [quote name='steve-soar' post='243054' date='Jul 18 2008, 09:24 PM']Is that an MC2 power amp? Gulp! That'll make you nads tingle.[/quote] Its a Carver PM1500 and it is rather tingly Link to comment Share on other sites More sharing options...
cd_david Posted July 19, 2008 Author Share Posted July 19, 2008 [quote name='Rasta' post='243200' date='Jul 19 2008, 08:19 AM']How much you looking for? Is there anyway this can be wired to create 8 ohms (My old Eden head min load for 800watts is 8 ohms, doesn't take 4)....am after an 8 ohm 8x10[/quote] Hi It has 2 separate inputs for the 2 4x10s both are 8 ohm loads, it offers the option of wiring in between cabs so you can run it at 4 ohms or 2 separate 8 ohms. I havent thought about price i was after swapping for a 610 before a sale, Hope this helps? Thanks Dave Link to comment Share on other sites More sharing options...
cd_david Posted July 20, 2008 Author Share Posted July 20, 2008 This is from the PDF and shows the connections and possible Ohmage loads Link to comment Share on other sites More sharing options...
Recommended Posts