Tanglewood Overwater Classic Jazz body and neck. SOLD £50

[hamfist]

now SOLD

I'm just not into red, and the neck has a slightly too wide nut (40mm) for me, so I know I won't use these. Someone will hopefully enjoy using the parts or building a bitsa. £50 for the lot posted within mainland UK.

Body is a solid poplar Overwater classic jazz body, obviously routed for PJ pickups. Will take a standard Jazz-shaped pickguard (with a P hole obviously), and a standard Fender-sized Jazz control plate.
Bridge holes are std Fender 5-in-a-row (plus 2).
PLease note there is a small hole drilled through the body from the pickup cavity to the rear of the body. The finish is more of a plum sparkle than red. There is also a battery compartment if you want to fit active electronics.

Neck is very nice actually, although slightly wider than a std Jazz neck with a 40mm nut width. It has a 62.5mm heel width, so will fit a std Fender neck pocket with a slight gap (about 0.5mm) around the edge. Although please measure any body you want to fit it to, as Fender/Squier heel widths do seem to vary greatly. This neck is straight, has had little wear, has no dings, and plays very nicely. Tuners are the excellent Overwater std tuners. There are a couple of small extra holes drilled at the rear of the headstock as someone has obviously fitted a detuner at some point.

[url=http://www.ephotobay.com/share/ow-front.html][/url]
[url=http://www.ephotobay.com/share/ow-rear.html][/url]

Edited June 28, 2014 by hamfist