hamfist Posted June 28, 2014 Posted June 28, 2014 (edited) now WITHDRAWN. I decided that selling this was like selling my soul .... we have been through so uch together. So I think we'll stay together until the end. THis is absolutely a one-of-a-kind body. Started as a Westone Thunder 1a mk3 body, having a maple/walnut spine with Ash wings. THese are lovely resonant bodies. Beautifully aged "old" wood. ATTENTION - Will fit standard FENDER necks !!! Has a 63.5mm heel slot width and the scale is perfect for std J or P necks. Refinished in a lovely peppermint green. Routed for various pickup configurations, so it's choose your pickguard and fit your pickups of choice ! The pickguard it will come with is for a reverse PJ setup. Has a good sized control cavity for fitting electronics and a battery compartment that will take one or two 9V batteries. Also comes with the genuine Westone "A Matsumoku product" neck plate. Has a number of holes for controls. You don't have to use them all, just fit with dummy pots/knobs for any unused ones. Mini-toggle switch is currently wired up as a battery on/off switch which is very useful for leaving your bass plugged in but not wasting your battery juice. Also comes with an output jack and strap buttons. Pretty light too. POsted to you in mainland UK for £60. PIcs, including a couple with the body made up as a whole bass, with a Fender-style neck. Obviously the sale is ONLY for the body, two rear cavity covers, pickguard, neck plate, cheapo BBOT bridge and strap buttons [url="http://www.ephotobay.com/share/w-main.html"][/url] [url="http://www.ephotobay.com/share/w-body-front.html"][/url] [url="http://www.ephotobay.com/share/w-rear.html"][/url] [url="http://www.ephotobay.com/share/w-angle.html"][/url] [url="http://www.ephotobay.com/share/westone-pj-green-c.html"][/url] Edited June 29, 2014 by hamfist
Recommended Posts