Jump to content
Why become a member? ×

Mark Bass cab+amp in gator case
£850


Recommended Posts

[b]PRICE DROP TO 700!!![/b] THE AMP ALONE COST NEARLY 800!!!!
[b]like new condition never gigged Comes in a gator case for transportation [/b]

item located at NP16

[b] Markbass Standard 151 HR[/b]

The Standard 151HR 1x15" cab will never leave you lacking in the bottom end department. Many players find that the 15" speakers give them a deep, classic sound that suits many musical styles. This cabinet can be used on it's own, but combining it with a Traveler 102P or a Standard 104HR makes for one powerful stack!
[b] Mark Bass Standard 151 HR Features:[/b][list]
[*][b]IMPEDANCE[/b]: 8 ohms
[*][b]SPEAKER SIZE[/b]: 1x15 in.
[*][b]BASS PORT[/b]: rear
[*][b]TWEETER[/b]: 1" compression driver with custom horn
[*][b]POWER HANDLING[/b]: 400W RMS (AES Standard)
[*][b]CROSSOVER FREQUENCY[/b]: 3.5 kHz
[*][b]FREQUENCY RESPONSE[/b]: 40 Hz to 20 kHz
[*][b]SENSITIVITY[/b]: 100 dB SPL
[*][b]WEIGHT[/b]: 52.9 lbs / 24 kg
[/list]
[b][u]Here's what MarkBass say about the R500 Bass Amp[/u][/b]
The Markbass R500 is a high-quality bass amplifier with a tube preamp and an analog power amp, which delivers 500W of power into
a 4 ohm cabinet, or 300W into an 8 ohm cabinet.

GROUND LIFT
switch on rear panel
OUTPUT
LINE OUT
balanced XLR, max. voltage 25 Vpp
EFFECT SEND
unbalanced, max. voltage 12 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 2 Vpp
SPEAKER OUT
speakon / 1/4" (x2)

OPTIONAL FOOTSWITCH
mute
OUTPUT POWER
500W RMS @ 4 ohms, 300W RMS @ 8 ohms

The R500's preamp uses one ECC83 tube, manufactured by JJ Electronics.

Edited by toolapcblack
Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...