Jump to content
Why become a member? ×

Warwick nut replacement advice


Pinball
 Share

Recommended Posts

Hi, I need to do something about the Just-a-nut11 on my Warwick FNA5. It's suffering from a common problem as the end plate has fallen off and the last time I changes strings I was alarmed to see it flip up in air. Its currently held in place by the strings but I want confidence in the bass and want it stable.

The Tech who normally sorts out my problems says "throw it away and I'll fit a bone nut for you rather than a replacement". A good solution I think as i know that he will set it up right and that the result will be stable. Any reason why I should stick with the Just-a-nut system?

Link to comment
Share on other sites

The JAN system is superb and I really wouldn't downgrade to a standard unadjustable nut; the bridge and nut setup is on of the Warwick plus points for sure.

Buy a Tedur(plastic, basically) Just-A-Nut III and have that fitted? If you have £60 odd spare, the brass Just a Nut III could be yours, too, as fitted to all German top-end Warwicks now :)

If you have to go non-Warwick, please don't put a white nut on!

Link to comment
Share on other sites

[quote name='Kev' timestamp='1406722159' post='2514053']
The JAN system is superb and I really wouldn't downgrade to a standard unadjustable nut; the bridge and nut setup is on of the Warwick plus points for sure.

Buy a Tedur(plastic, basically) Just-A-Nut III and have that fitted? If you have £60 odd spare, the brass Just a Nut III could be yours, too, as fitted to all German top-end Warwicks now :)

If you have to go non-Warwick, please don't put a white nut on!
[/quote]

On further reading it seems that the Just-a-nut111 is a much better design than the JA11 (that is a disaster). Thoman have a good deal on the Just-a-nuts at the moment. It's less that £50 for a brass one so I will go that route. Thanks

Link to comment
Share on other sites

[url="http://shop.warwick.de/?&c=35352310036&lang=en&smk=1&nm=D0405358001321517424A43801|Warwick|D0525953001321517425A44262|D0216070001321517426A44513&modul=shop&site=shop_overview"]Warwick.de neck spares[/url] here is a link the Warwick direct shop. The Tedur (plastics one) are a fair bit cheaper. Very easy to fit.

Be careful to buy the right one. They come in the standard and broadneck sizes.

Edited by gingerfish
Link to comment
Share on other sites

Thanks for this. I've just ordered a brass Just-a-Nut III direct from the Warwick shop (roughly the same price as Thoman) together with other various bits and bobs I needed.

The price of the two piece bridge is a bit eye-watering! That'll have to wait.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...