paul_5 Posted August 29, 2014 Share Posted August 29, 2014 I've finally settled on the definitive pickup array for my Jazz Bitsa (well, for now) and am left with a body cavity leading into the neck pocket from pickup placement experiments (it's a big, MM hum bucker sized cavity). I'm looking to fill the gap with a dutchman initially for strength, as that's where the neck joins the body, but I reckon there's the possibility of choosing a 'proper' wood to fill the gap that will benefit me tonally. I like quite a bright sound in my basses, so the obvious ones to go for would be ash or maple, but does anyone have any other ideas. I likes 'em a bit growly too, so would it be unfeasible to shove a lump of wenge in there, or would that just be too pricey? Advice sought. Quote Link to comment Share on other sites More sharing options...
JPJ Posted August 29, 2014 Share Posted August 29, 2014 Hmmm this could be a very interesting experiment Personally, I'm still in the 'jury's out' camp when it comes to whether the wood alone is the source of either 'growl' or 'brightness' etc. Most basses made today will be from two or more pieces of wood glued together, so in theory, the glue is also 'contributing' to the overall sound. Warwick basses, famed for their growl use wenge but the also use a separate bridge and tailpiece, active electronics and very often, the growlier ones are neck thru's. Contrast that with a typical F type with the BBOT bridge, passive pickups and bolt on necks and there are a lot of variables between the string and the amp to affect the 'sound'. I accept that neck thru's are a very different beast to bolt-on's and, personally, I prefer bolt-on's as the amount of detail you hear with a neck thru shows up my sloppy playing After saying all of that, I would just go with a piece of timber that is the same as the rest of the body and make a structural repair. I can't imagine that the amount of wood that you are adding versus the amount of wood remaining from the original body would be sufficient to make a noticeable change to the sound of the bass. Quote Link to comment Share on other sites More sharing options...
paul_5 Posted August 29, 2014 Author Share Posted August 29, 2014 Cheers JPJ, I reckon I'll just source a chunk of ash and have done with it…. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.